A Brief Review of Acoustic and Vibration Signal-Based Fault Detection for Belt Conveyor Idlers Using Machine Learning Models
Sensors · 08.02.2023 · 23 (4) · 1902
DOI: 10.3390/s23041902 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 08.02.2023. Verfasst von Fahad Alharbi und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Information and Physical Sciences, The University of Newcastle, Newcastle, NSW 2308, Australia. Die Arbeit wurde bisher 87-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Due to increasing demands for ensuring the safety and reliability of a system, fault detection (FD) has received considerable attention in modern industries to monitor their machines. Bulk materials are transported worldwide using belt conveyors as an essential transport system. The majority of conveyor components are monitored continuously to ensure their reliability, but idlers remain a challenge to monitor due to the large number of idlers (rollers) distributed throughout the working environment. These idlers are prone to external noises or disturbances that cause a failure in the underlying system operations. The research community has begun using machine learning (ML) to detect idler’s defects to assist industries in responding to failures on time. Vibration and acoustic measurements are commonly employed to monitor the condition of idlers. However, there has been no comprehensive review of FD for belt conveyor idlers. This paper presents a recent review of acoustic and vibration signal-based fault detection for belt conveyor idlers using ML models. It also discusses major steps in the approaches, such as data collection, signal processing, feature extraction and selection, and ML model construction. Additionally, the paper provides an overview of the main components of belt conveyor systems, sources of defects in idlers, and a brief introduction to ML models. Finally, it highlights critical open challenges and provides future research directions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Information and Physical Sciences, The University of Newcastle, Newcastle, NSW 2308, Australia.
- Department of Information Technology, College of Computers and Information Technology, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia.
- Department of Data Science, University of the Punjab, Lahore 54890, Pakistan.
- School of Engineering, University of Newcastle, Callaghan, NSW 2308, Australia.
ORCID-Profile: Fahad Alharbi, Kamran Shaukat, Craig A Wheeler
Zitieren
APA
Alharbi, F., Luo, S., Zhang, H., Shaukat, K., Yang, G., Wheeler, C. A., & Chen, Z. (2023). A Brief Review of Acoustic and Vibration Signal-Based Fault Detection for Belt Conveyor Idlers Using Machine Learning Models. Sensors, 23(4), 1902. https://doi.org/10.3390/s23041902
Vancouver
Alharbi F, Luo S, Zhang H, Shaukat K, Yang G, Wheeler CA, et al. A Brief Review of Acoustic and Vibration Signal-Based Fault Detection for Belt Conveyor Idlers Using Machine Learning Models. Sensors. 2023;23(4):1902. doi:10.3390/s23041902
BibTeX
@article{Alharbi2023,
author = {Alharbi, Fahad and Luo, Suhuai and Zhang, Hongyu and Shaukat, Kamran and Yang, Guang and Wheeler, Craig A and Chen, Zhiyong},
title = {A Brief Review of Acoustic and Vibration Signal-Based Fault Detection for Belt Conveyor Idlers Using Machine Learning Models},
journal = {Sensors},
year = {2023},
volume = {23},
number = {4},
pages = {1902},
doi = {10.3390/s23041902}
}
EUVIMED