EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Metrological Analysis of a Backlit Vision System for Surface Roughness Measurements of Turned Parts

Alessia Baleani, Nicola Paone iD, Jona Gladines iD, Steve Vanlanduit iD

Sensors · 01.02.2023 · 23 (3) · 1584

DOI: 10.3390/s23031584 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.02.2023. Verfasst von Alessia Baleani und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, 60121 Ancona, Italy. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regione Marche, FWO SBO, Erasmus+ Traineeship program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The focus of this study is to design a backlit vision instrument capable of measuring surface roughness and to discuss its metrological performance compared to traditional measurement instruments. The instrument is a non-contact high-magnification imaging system characterized by short inspection time which opens the perspective of in-line implementation. We combined the use of the modulation transfer function to evaluate the imaging conditions of an electrically tunable lens to obtain an optimally focused image. We prepared a set of turned steel samples with different roughness in the range Ra 2.4 µm to 15.1 µm. The layout of the instrument is presented, including a discussion on how optimal imaging conditions were obtained. The paper describes the comparison performed on measurements collected with the vision system designed in this work and state-of-the-art instruments. A comparison of the results of the backlit system depends on the values of surface roughness considered; while at larger values of roughness the offset increases, the results are compatible with the ones of the stylus at lower values of roughness. In fact, the error bands are superimposed by at least 58% based on the cases analyzed.

Schlagwörter

Stichwörter der Autor:innen

backlit vision-based measurement systemnon-contact measurement systemsurface roughness measurementuncertainty analysis

Autor:innen und Institutionen

  • Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, 60121 Ancona, Italy.
  • Faculty of Applied Engineering, Universiteit Antwerpen, 2000 Antwerp, Belgium.

ORCID-Profile: Nicola Paone, Jona Gladines, Steve Vanlanduit

Förderung

  • Regione Marche
  • FWO SBO
  • Erasmus+ Traineeship program
  • FWO SBO project HiPas

Zitieren

APA

Baleani, A., Paone, N., Gladines, J., & Vanlanduit, S. (2023). Design and Metrological Analysis of a Backlit Vision System for Surface Roughness Measurements of Turned Parts. Sensors, 23(3), 1584. https://doi.org/10.3390/s23031584

Vancouver

Baleani A, Paone N, Gladines J, Vanlanduit S. Design and Metrological Analysis of a Backlit Vision System for Surface Roughness Measurements of Turned Parts. Sensors. 2023;23(3):1584. doi:10.3390/s23031584

BibTeX
@article{Baleani2023,
  author = {Baleani, Alessia and Paone, Nicola and Gladines, Jona and Vanlanduit, Steve},
  title = {Design and Metrological Analysis of a Backlit Vision System for Surface Roughness Measurements of Turned Parts},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {3},
  pages = {1584},
  doi = {10.3390/s23031584}
}
Kostenlos starten →