EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Frequency Comb-Based Ground-Penetrating Bioradar: System Implementation and Signal Processing

Di Shi iD, Gunnar Gidion iD, Taimur Aftab, Leonhard M Reindl iD, Stefan J Rupitsch iD

Sensors · 25.01.2023 · 23 (3) · 1335

DOI: 10.3390/s23031335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.01.2023. Verfasst von Di Shi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Electrical Instrumentation and Embedded Systems, Department of Microsystems Engineering-IMTEK, University of Freiburg, Georges-Köhler-…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Education and Research, German Federal Ministry of Education and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Radars can be used as sensors to detect the breathing of victims trapped under layers of building materials in catastrophes like earthquakes or gas explosions. In this contribution, we present the implementation of a novel frequency comb continuous wave (FCCW) bioradar module using a commercial software-defined radio (SDR). The FCCW radar transmits multiple equally spaced frequency components simultaneously. The data acquisition of the received combs is frequency domain-based. Hence, it does not require synchronization between the transmit and receive channels, as time domain-based broadband radars, such as ultra wideband (UWB) pulse radar and frequency-modulated CW (FMCW) radar, do. Since a frequency comb has an instantaneous wide bandwidth, the effective scan rate is much higher than that of a step frequency CW (SFCW) radar. This FCCW radar is particularly suitable for small motion detection. Using inverse fast Fourier transform (IFFT), we can decompose the received frequency comb into different ranges and remove ghost signals and interference of further range intervals. The frequency comb we use in this report has a bandwidth of only 60 MHz, resulting in a range resolution of up to 2.5 m, much larger than respiration-induced chest wall motions. However, we demonstrate that in the centimeter range, motions can be detected and evaluated by processing the received comb signals. We want to integrate the bioradar into an unmanned aircraft system for fast and safe search and rescue operations. As a trade-off between ground penetrability and the size and weight of the antenna and the radar module, we use 1.3 GHz as the center frequency. Field measurements show that the proposed FCCW bioradar can detect an alive person through different nonmetallic building materials.

Schlagwörter

Stichwörter der Autor:innen

bioradarfrequency combground-penetratingrange gatingrespiration detectionsearch and rescuesignal processingsoftware-defined radio

Autor:innen und Institutionen

  • Laboratory for Electrical Instrumentation and Embedded Systems, Department of Microsystems Engineering-IMTEK, University of Freiburg, Georges-Köhler-Allee 106, 79110 Freiburg, Germany.

ORCID-Profile: Di Shi, Gunnar Gidion, Leonhard M Reindl, Stefan J Rupitsch

Förderung

  • Federal Ministry of Education and Research
  • German Federal Ministry of Education and Research

Zitieren

APA

Shi, D., Gidion, G., Aftab, T., Reindl, L. M., & Rupitsch, S. J. (2023). Frequency Comb-Based Ground-Penetrating Bioradar: System Implementation and Signal Processing. Sensors, 23(3), 1335. https://doi.org/10.3390/s23031335

Vancouver

Shi D, Gidion G, Aftab T, Reindl LM, Rupitsch SJ. Frequency Comb-Based Ground-Penetrating Bioradar: System Implementation and Signal Processing. Sensors. 2023;23(3):1335. doi:10.3390/s23031335

BibTeX
@article{Shi2023,
  author = {Shi, Di and Gidion, Gunnar and Aftab, Taimur and Reindl, Leonhard M and Rupitsch, Stefan J},
  title = {Frequency Comb-Based Ground-Penetrating Bioradar: System Implementation and Signal Processing},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {3},
  pages = {1335},
  doi = {10.3390/s23031335}
}
Kostenlos starten →