EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Hybrid Controller for a Soft Pneumatic Manipulator Based on Model Predictive Control and Iterative Learning Control

Yicheng Dai, Zhihao Deng, Xin Wang iD, Han Yuan

Sensors · 22.01.2023 · 23 (3) · 1272

DOI: 10.3390/s23031272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 22.01.2023. Verfasst von Yicheng Dai und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Automation, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation Committee of Shenzhen, Program of Shenzhen Peacock Innovation Team.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the outstanding characteristics of the large structural flexibility and strong dexterity of soft robots, they have attracted great attention. However, the dynamic modeling and precise control of soft robots face huge challenges. Traditional model-based and model-free control methods find it difficult to obtain a balance between complexity and accuracy. In this paper, a dynamic model of a three-chamber continuous pneumatic manipulator is established based on the modal method. Moreover, a hybrid controller integrating model predictive control (MPC) and iterative learning control (ILC) is proposed, which can simultaneously perform model parameter learning and trajectory tracking control. Experimental results show that the proposed control method can optimize the parameters of the dynamic model in real time with less iterations than the traditional model-free method and have good control performance in trajectory tracking experiments. In the future, the proposed dynamic model and the hybrid controller should be verified on a multi-section manipulator.

Schlagwörter

Stichwörter der Autor:innen

dynamic modelinghybrid controllerpneumatic manipulator

Autor:innen und Institutionen

  • School of Mechanical Engineering and Automation, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
  • Guangdong Key Laboratory of Intelligent Morphing Mechanisms and Adaptive Robotics, Shenzhen 518055, China.

ORCID-Profile: Xin Wang

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Innovation Committee of Shenzhen
  • Program of Shenzhen Peacock Innovation Team

Zitieren

APA

Dai, Y., Deng, Z., Wang, X., & Yuan, H. (2023). A Hybrid Controller for a Soft Pneumatic Manipulator Based on Model Predictive Control and Iterative Learning Control. Sensors, 23(3), 1272. https://doi.org/10.3390/s23031272

Vancouver

Dai Y, Deng Z, Wang X, Yuan H. A Hybrid Controller for a Soft Pneumatic Manipulator Based on Model Predictive Control and Iterative Learning Control. Sensors. 2023;23(3):1272. doi:10.3390/s23031272

BibTeX
@article{Dai2023,
  author = {Dai, Yicheng and Deng, Zhihao and Wang, Xin and Yuan, Han},
  title = {A Hybrid Controller for a Soft Pneumatic Manipulator Based on Model Predictive Control and Iterative Learning Control},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {3},
  pages = {1272},
  doi = {10.3390/s23031272}
}
Kostenlos starten →