EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FPGA Implementation of the Chirp-Scaling Algorithm for Real-Time Synthetic Aperture Radar Imaging

Jaehyeon Lee iD, Dongmin Jeong iD, Seongwook Lee iD, Myeongjin Lee iD, Wookyung Lee iD, Yunho Jung iD

Sensors · 14.01.2023 · 23 (2) · 959

DOI: 10.3390/s23020959 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.01.2023. Verfasst von Jaehyeon Lee und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronics and Information Engineering, Korea Aerospace University, Goyang-si 10540, Republic of Korea. Hauptthemen laut MEDLINE: Radar, Aircraft. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agency for Defense Development, Defense Acquisition Program Administration (DAPA).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Synthetic aperture radar (SAR), which can generate images of regions or objects, is an important research area of radar. The chirp scaling algorithm (CSA) is a representative SAR imaging algorithm. The CSA has a simple structure comprising phase compensation and fast Fourier transform (FFT) operations by replacing interpolation for range cell migration correction (RCMC) with phase compensation. However, real-time processing still requires many computations and a long execution time. Therefore, it is necessary to develop a hardware accelerator to improve the speed of algorithm processing. In addition, the demand for a small SAR system that can be mounted on a small aircraft or drone and that satisfies the constraints of area and power consumption is increasing. In this study, we proposed a CSA-based SAR processor that supports FFT and phase compensation operations and presents field-programmable gate array (FPGA)-based implementation results. We also proposed a modified CSA flow that simplifies the traditional CSA flow by changing the order in which the transpose operation occurs. Therefore, the proposed CSA-based SAR processor was designed to be suitable for modified CSA flow. We designed the multiplier for FFT to be shared for phase compensation, thereby achieving area efficiency and simplifying the data flow. The proposed CSA-based SAR processor was implemented on a Xilinx UltraScale+ MPSoC FPGA device and designed using Verilog-HDL. After comparing the execution times of the proposed SAR processor and the ARM cortex-A53 microprocessor, we observed a 136.2-fold increase in speed for the 4096 × 4096-pixel image.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RadarAircraftAlgorithmsCell MovementCerebral Cortex

Stichwörter der Autor:innen

chirp-scaling algorithm (CSA)field programmable gate array (FPGA)real-time processingsynthetic aperture radar (SAR)systolic array processor

Autor:innen und Institutionen

  • School of Electronics and Information Engineering, Korea Aerospace University, Goyang-si 10540, Republic of Korea.
  • Department of Smart Air Mobility, Korea Aerospace University, Goyang-si 10540, Republic of Korea.

ORCID-Profile: Jaehyeon Lee, Dongmin Jeong, Seongwook Lee, Myeongjin Lee, Wookyung Lee, Yunho Jung

Förderung

  • Agency for Defense Development
  • Defense Acquisition Program Administration (DAPA)

Zitieren

APA

Lee, J., Jeong, D., Lee, S., Lee, M., Lee, W., & Jung, Y. (2023). FPGA Implementation of the Chirp-Scaling Algorithm for Real-Time Synthetic Aperture Radar Imaging. Sensors, 23(2), 959. https://doi.org/10.3390/s23020959

Vancouver

Lee J, Jeong D, Lee S, Lee M, Lee W, Jung Y. FPGA Implementation of the Chirp-Scaling Algorithm for Real-Time Synthetic Aperture Radar Imaging. Sensors. 2023;23(2):959. doi:10.3390/s23020959

BibTeX
@article{Lee2023,
  author = {Lee, Jaehyeon and Jeong, Dongmin and Lee, Seongwook and Lee, Myeongjin and Lee, Wookyung and Jung, Yunho},
  title = {FPGA Implementation of the Chirp-Scaling Algorithm for Real-Time Synthetic Aperture Radar Imaging},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {2},
  pages = {959},
  doi = {10.3390/s23020959}
}
Kostenlos starten →