EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 2-V 1.4-dB NF GaAs MMIC LNA for K-Band Applications

David Galante-Sempere iD, Sunil Lalchand Khemchandani iD, Javier Del Pino iD

Sensors · 2023

DOI: 10.3390/s23020867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von David Galante-Sempere und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Applied Microelectronics (IUMA), Department of Electronics and Automatic Engineering, University of Las Palmas de Gran Canaria (ULPGC),…. Hauptthemen laut MEDLINE: Microwaves, Prostheses and Implants. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ERDF a way of making Europe, Canarian Agency for Research, Innovation, and Information Society (ACIISI) of the Canary Islands Government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A 1.4-dB Noise Figure (NF) four-stage K-band Monolithic Microwave Integrated Circuit (MMIC) Low-Noise Amplifier (LNA) in UMS 100 nm GaAs pHEMT technology is presented. The proposed circuit is designed to cover the 5G New Release n258 frequency band (24.25–27.58 GHz). Momentum EM post-layout simulations reveal the circuit achieves a minimum NF of 1.3 dB, a maximum gain of 34 dB, |S11| better than –10 dB from 23 GHz to 29 GHz, a P1dB of –18 dBm and an OIP3 of 24.5 dBm. The LNA draws a total current of 59.1 mA from a 2 V DC supply and results in a chip size of 3300 × 1800 µm2 including pads. We present a design methodology focused on the selection of the active device size and DC bias conditions to obtain the lowest NF when source degeneration is applied. The design procedure ensures a minimum NF design by selecting a device which facilitates a simple input matching network implementation and obtains a reasonable input return loss thanks to the application of source degeneration. With this approach the input matching network is implemented with a shunt stub and a transmission line, therefore minimizing the contribution to the NF achieved by the first stage. Comparisons with similar works demonstrate the developed circuit is very competitive with most of the state-of-the-art solutions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MicrowavesProstheses and ImplantsAmplifiers, ElectronicTechnologyArsenicalsGallium

Stichwörter der Autor:innen

5GK-bandelectromagnetic simulationgallium arsenideinput return losslow noise amplifiermonolithic microwave integrated circuitnoise figure

Substanzen

gallium arsenideArsenicalsGallium

Autor:innen und Institutionen

  • Institute for Applied Microelectronics (IUMA), Department of Electronics and Automatic Engineering, University of Las Palmas de Gran Canaria (ULPGC), Campus Universitario de Tafira, 35017 Las Palmas de Gran Canaria, Spa…

ORCID-Profile: David Galante-Sempere, Sunil Lalchand Khemchandani, Javier Del Pino

Förderung

  • ERDF a way of making Europe
  • Canarian Agency for Research, Innovation, and Information Society (ACIISI) of the Canary Islands Government

Zitieren

APA

Galante-Sempere, D., Khemchandani, S. L., & Del Pino, J. (2023). A 2-V 1.4-dB NF GaAs MMIC LNA for K-Band Applications. Sensors. https://doi.org/10.3390/s23020867

Vancouver

Galante-Sempere D, Khemchandani SL, Del Pino J. A 2-V 1.4-dB NF GaAs MMIC LNA for K-Band Applications. Sensors. 2023. doi:10.3390/s23020867

BibTeX
@article{GalanteSempere2023,
  author = {Galante-Sempere, David and Khemchandani, Sunil Lalchand and Del Pino, Javier},
  title = {A 2-V 1.4-dB NF GaAs MMIC LNA for K-Band Applications},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23020867}
}
Kostenlos starten →