A Method of Setting the LiDAR Field of View in NDT Relocation Based on ROI
Sensors · 2023
DOI: 10.3390/s23020843 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Jian Gu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo 255000, China. Hauptthemen laut MEDLINE: Algorithms, Records. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yubin Lan, “One Event and One Discussion” for Importing Top Talent in Shandong Province, Zibo Unmanned Farm Research Institute Project.
Abstract (Originalsprache)
LiDAR placement and field of view selection play a role in detecting the relative position and pose of vehicles in relocation maps based on high-precision map automatic navigation. When the LiDAR field of view is obscured or the LiDAR position is misplaced, this can easily lead to loss of repositioning or low repositioning accuracy. In this paper, a method of LiDAR layout and field of view selection based on high-precision map normal distribution transformation (NDT) relocation is proposed to solve the problem of large NDT relocation error and position loss when the occlusion field of view is too large. To simulate the real placement environment and the LiDAR obstructed by obstacles, the ROI algorithm is used to cut LiDAR point clouds and to obtain LiDAR point cloud data of different sizes. The cut point cloud data is first downsampled and then relocated. The downsampling points for NDT relocation are recorded as valid matching points. The direction and angle settings of the LiDAR point cloud data are optimized using RMSE values and valid matching points. The results show that in the urban scene with complex road conditions, there are more front and rear matching points than left and right matching points within the unit angle. The more matching points of the NDT relocation algorithm there are, the higher the relocation accuracy. Increasing the front and rear LiDAR field of view prevents the loss of repositioning. The relocation accuracy can be improved by increasing the left and right LiDAR field of view.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo 255000, China.
- Shandong University of Technology Sub-Center of National Center for International Collaboration Research on Precision Agricultural Aviation Pesticide Spraying Technology, National Sub-Center for International Collaborat…
- National Center for International Collaboration Research on Precision Agricultural Aviation Pesticides Spraying Technology, College of Engineering, Shandong University of Technology, Guangzhou 510642, China.
ORCID-Profile: Jian Gu
Förderung
- Yubin Lan
- “One Event and One Discussion” for Importing Top Talent in Shandong Province
- Zibo Unmanned Farm Research Institute Project
Zitieren
APA
Gu, J., Lan, Y., Kong, F., Liu, L., Sun, H., Liu, J., & Yi, L. (2023). A Method of Setting the LiDAR Field of View in NDT Relocation Based on ROI. Sensors. https://doi.org/10.3390/s23020843
Vancouver
Gu J, Lan Y, Kong F, Liu L, Sun H, Liu J, et al. A Method of Setting the LiDAR Field of View in NDT Relocation Based on ROI. Sensors. 2023. doi:10.3390/s23020843
BibTeX
@article{Gu2023,
author = {Gu, Jian and Lan, Yubin and Kong, Fanxia and Liu, Lei and Sun, Haozheng and Liu, Jie and Yi, Lili},
title = {A Method of Setting the LiDAR Field of View in NDT Relocation Based on ROI},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23020843}
}
EUVIMED