Vision-Based Autonomous Following of a Moving Platform and Landing for an Unmanned Aerial Vehicle
Sensors · 11.01.2023 · 23 (2) · 829
DOI: 10.3390/s23020829 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 11.01.2023. Verfasst von Jesús Morales und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Mechatronics Engineering & Cyber-Physical Systems (IMECH), Universidad de Málaga, 29071 Málaga, Spain. Hauptthemen laut MEDLINE: Unmanned Aerial Devices, Communication. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ISR/LARSyS Strategic Funding, Interreg Atlantic Area Programme, Andalusian regional government.
Abstract (Originalsprache)
Interest in Unmanned Aerial Vehicles (UAVs) has increased due to their versatility and variety of applications, however their battery life limits their applications. Heterogeneous multi-robot systems can offer a solution to this limitation, by allowing an Unmanned Ground Vehicle (UGV) to serve as a recharging station for the aerial one. Moreover, cooperation between aerial and terrestrial robots allows them to overcome other individual limitations, such as communication link coverage or accessibility, and to solve highly complex tasks, e.g., environment exploration, infrastructure inspection or search and rescue. This work proposes a vision-based approach that enables an aerial robot to autonomously detect, follow, and land on a mobile ground platform. For this purpose, ArUcO fiducial markers are used to estimate the relative pose between the UAV and UGV by processing RGB images provided by a monocular camera on board the UAV. The pose estimation is fed to a trajectory planner and four decoupled controllers to generate speed set-points relative to the UAV. Using a cascade loop strategy, these set-points are then sent to the UAV autopilot for inner loop control. The proposed solution has been tested both in simulation, with a digital twin of a solar farm using ROS, Gazebo and Ardupilot Software-in-the-Loop (SiL); and in the real world at IST Lisbon’s outdoor facilities, with a UAV built on the basis of a DJ550 Hexacopter and a modified Jackal ground robot from DJI and Clearpath Robotics, respectively. Pose estimation, trajectory planning and speed set-point are computed on board the UAV, using a Single Board Computer (SBC) running Ubuntu and ROS, without the need for external infrastructure.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute for Mechatronics Engineering & Cyber-Physical Systems (IMECH), Universidad de Málaga, 29071 Málaga, Spain.
- Instituto Superior Técnico (IST), Universidade de Lisboa, 1049-001 Lisboa, Portugal.
ORCID-Profile: Jesús Morales, Rodrigo Serra, Pedro U Lima, Meysam Basiri
Förderung
- ISR/LARSyS Strategic Funding
- Interreg Atlantic Area Programme
- Andalusian regional government
- University of Malaga
- the Andalusian project
- University of Málaga
Zitieren
APA
Morales, J., Castelo, I., Serra, R., Lima, P. U., & Basiri, M. (2023). Vision-Based Autonomous Following of a Moving Platform and Landing for an Unmanned Aerial Vehicle. Sensors, 23(2), 829. https://doi.org/10.3390/s23020829
Vancouver
Morales J, Castelo I, Serra R, Lima PU, Basiri M. Vision-Based Autonomous Following of a Moving Platform and Landing for an Unmanned Aerial Vehicle. Sensors. 2023;23(2):829. doi:10.3390/s23020829
BibTeX
@article{Morales2023,
author = {Morales, Jesús and Castelo, Isabel and Serra, Rodrigo and Lima, Pedro U and Basiri, Meysam},
title = {Vision-Based Autonomous Following of a Moving Platform and Landing for an Unmanned Aerial Vehicle},
journal = {Sensors},
year = {2023},
volume = {23},
number = {2},
pages = {829},
doi = {10.3390/s23020829}
}
EUVIMED