Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization
Sensors · 07.01.2023 · 23 (2) · 693
DOI: 10.3390/s23020693 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 07.01.2023. Verfasst von Jonathan Melchiorre und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Structural, Geotechnical and Building Engineering (DISEG), Politecnico di Torino, Corso Duca Degli Abruzzi, 24, 10128 Turin, Italy. Hauptthemen laut MEDLINE: Artificial Intelligence, Acoustics. Die Arbeit wurde bisher 59-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Marie Skłodowska-Curie Research.
Abstract (Originalsprache)
The acoustic emission (AE) technique is one of the most widely used in the field of structural monitoring. Its popularity mainly stems from the fact that it belongs to the category of non-destructive techniques (NDT) and allows the passive monitoring of structures. The technique employs piezoelectric sensors to measure the elastic ultrasonic wave that propagates in the material as a result of the crack formation’s abrupt release of energy. The recorded signal can be investigated to obtain information about the source crack, its position, and its typology (Mode I, Mode II). Over the years, many techniques have been developed for the localization, characterization, and quantification of damage from the study of acoustic emission. The onset time of the signal is an essential information item to be derived from waveform analysis. This information combined with the use of the triangulation technique allows for the identification of the crack location. In the literature, it is possible to find many methods to identify, with increasing accuracy, the onset time of the P-wave. Indeed, the precision of the onset time detection affects the accuracy of identifying the location of the crack. In this paper, two techniques for the definition of the onset time of acoustic emission signals are presented. The first method is based on the Akaike Information Criterion (AIC) while the second one relies on the use of artificial intelligence (AI). A recurrent convolutional neural network (R-CNN) designed for sound event detection (SED) is trained on three different datasets composed of seismic signals and acoustic emission signals to be tested on a real-world acoustic emission dataset. The new method allows taking advantage of the similarities between acoustic emissions, seismic signals, and sound signals, enhancing the accuracy in determining the onset time.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Structural, Geotechnical and Building Engineering (DISEG), Politecnico di Torino, Corso Duca Degli Abruzzi, 24, 10128 Turin, Italy.
- College of Civil Engineering, Fuzhou University, Fuzhou 350108, China.
ORCID-Profile: Jonathan Melchiorre, Amedeo Manuello Bertetto, Marco Martino Rosso, Giuseppe Carlo Marano
Förderung
- Marie Skłodowska-Curie Research
Zitieren
APA
Melchiorre, J., Manuello Bertetto, A., Rosso, M. M., & Marano, G. C. (2023). Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization. Sensors, 23(2), 693. https://doi.org/10.3390/s23020693
Vancouver
Melchiorre J, Manuello Bertetto A, Rosso MM, Marano GC. Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization. Sensors. 2023;23(2):693. doi:10.3390/s23020693
BibTeX
@article{Melchiorre2023,
author = {Melchiorre, Jonathan and Manuello Bertetto, Amedeo and Rosso, Marco Martino and Marano, Giuseppe Carlo},
title = {Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization},
journal = {Sensors},
year = {2023},
volume = {23},
number = {2},
pages = {693},
doi = {10.3390/s23020693}
}
EUVIMED