EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anomaly Detection and Repairing for Improving Air Quality Monitoring

Federica Rollo iD, Chiara Bachechi iD, Laura Po iD

Sensors · 06.01.2023 · 23 (2) · 640

DOI: 10.3390/s23020640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.01.2023. Verfasst von Federica Rollo und 2 weiteren Autor:innen. Beteiligte Einrichtung: "Enzo Ferrari" Engineering Department, University of Modena and Reggio Emilia, 41121 Modena, Italy. Hauptthemen laut MEDLINE: Air Pollutants, Air Pollution, Environmental Pollutants. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation and Networks Executive Agency, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clean air in cities improves our health and overall quality of life and helps fight climate change and preserve our environment. High-resolution measures of pollutants’ concentrations can support the identification of urban areas with poor air quality and raise citizens’ awareness while encouraging more sustainable behaviors. Recent advances in Internet of Things (IoT) technology have led to extensive use of low-cost air quality sensors for hyper-local air quality monitoring. As a result, public administrations and citizens increasingly rely on information obtained from sensors to make decisions in their daily lives and mitigate pollution effects. Unfortunately, in most sensing applications, sensors are known to be error-prone. Thanks to Artificial Intelligence (AI) technologies, it is possible to devise computationally efficient methods that can automatically pinpoint anomalies in those data streams in real time. In order to enhance the reliability of air quality sensing applications, we believe that it is highly important to set up a data-cleaning process. In this work, we propose AIrSense, a novel AI-based framework for obtaining reliable pollutant concentrations from raw data collected by a network of low-cost sensors. It enacts an anomaly detection and repairing procedure on raw measurements before applying the calibration model, which converts raw measurements to concentration measurements of gasses. There are very few studies of anomaly detection in raw air quality sensor data (millivolts). Our approach is the first that proposes to detect and repair anomalies in raw data before they are calibrated by considering the temporal sequence of the measurements and the correlations between different sensor features. If at least some previous measurements are available and not anomalous, it trains a model and uses the prediction to repair the observations; otherwise, it exploits the previous observation. Firstly, a majority voting system based on three different algorithms detects anomalies in raw data. Then, anomalies are repaired to avoid missing values in the measurement time series. In the end, the calibration model provides the pollutant concentrations. Experiments conducted on a real dataset of 12,000 observations produced by 12 low-cost sensors demonstrated the importance of the data-cleaning process in improving calibration algorithms’ performances.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Air PollutantsAir PollutionEnvironmental PollutantsParticulate MatterArtificial IntelligenceQuality of LifeReproducibility of ResultsEnvironmental Monitoring

Stichwörter der Autor:innen

air quality monitoringair quality sensorsanomaly detectionanomaly repairinglow-cost sensorsmultivariate time series

Substanzen

Air PollutantsParticulate MatterEnvironmental Pollutants

Autor:innen und Institutionen

  • "Enzo Ferrari" Engineering Department, University of Modena and Reggio Emilia, 41121 Modena, Italy.

ORCID-Profile: Federica Rollo, Chiara Bachechi, Laura Po

Förderung

  • Innovation and Networks Executive Agency
  • European Union

Zitieren

APA

Rollo, F., Bachechi, C., & Po, L. (2023). Anomaly Detection and Repairing for Improving Air Quality Monitoring. Sensors, 23(2), 640. https://doi.org/10.3390/s23020640

Vancouver

Rollo F, Bachechi C, Po L. Anomaly Detection and Repairing for Improving Air Quality Monitoring. Sensors. 2023;23(2):640. doi:10.3390/s23020640

BibTeX
@article{Rollo2023,
  author = {Rollo, Federica and Bachechi, Chiara and Po, Laura},
  title = {Anomaly Detection and Repairing for Improving Air Quality Monitoring},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {2},
  pages = {640},
  doi = {10.3390/s23020640}
}
Kostenlos starten →