Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments
Sensors · 2023
DOI: 10.3390/s23020605 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Tiago Matos und 6 weiteren Autor:innen. Beteiligte Einrichtung: CMEMS-UMinho, Campus de Azurém, University of Minho, 4800-058 Guimarães, Portugal. Hauptthemen laut MEDLINE: Biofouling, Disinfectants. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT–Fundação para a Ciência e Tecnologia, Knowledge and Data from the Deep to Space, European Regional Development Fund.
Abstract (Originalsprache)
Biofouling is the major factor that limits long-term monitoring studies with automated optical instruments. Protection of the sensing areas, surfaces, and structural housing of the sensors must be considered to deliver reliable data without the need for cleaning or maintenance. In this work, we present the design and field validation of different techniques for biofouling protection based on different housing materials, biocides, and transparent coatings. Six optical turbidity probes were built using polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), PLA with copper filament, ABS coated with PDMS, ABS coated with epoxy and ABS assembled with a system for in situ chlorine production. The probes were deployed in the sea for 48 days and their anti-biofouling efficiency was evaluated using the results of the field experiment, visual inspections, and calibration signal loss after the tests. The PLA and ABS were used as samplers without fouling protection. The probe with chlorine production outperformed the other techniques, providing reliable data during the in situ experiment. The copper probe had lower performance but still retarded the biological growth. The techniques based on transparent coatings, epoxy, and PDMS did not prevent biofilm formation and suffered mostly from micro-biofouling.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- CMEMS-UMinho, Campus de Azurém, University of Minho, 4800-058 Guimarães, Portugal.
- LABBELS-Associate Laboratory, 4800-058 Guimarães, Portugal.
- INESC TEC, 4200-465 Porto, Portugal.
- Grupo de Oceanografía Biolóxica, Faculty of Marine Science, Universidade de Vigo, 36310 Vigo, Spain.
- Institute of Earth Sciences, Campus de Gualtar, University of Minho Pole, 4710-057 Braga, Portugal.
ORCID-Profile: Tiago Matos, Vânia Pinto, Paulo Sousa, Marcos Martins, Renato Henriques, Luis Miguel Gonçalves
Förderung
- FCT–Fundação para a Ciência e Tecnologia
- Knowledge and Data from the Deep to Space
- European Regional Development Fund
- Portuguese Foundation for Science and Technology
Zitieren
APA
Matos, T., Pinto, V., Sousa, P., Martins, M., Fernández, E., Henriques, R., & Gonçalves, L. M. (2023). Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments. Sensors. https://doi.org/10.3390/s23020605
Vancouver
Matos T, Pinto V, Sousa P, Martins M, Fernández E, Henriques R, et al. Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments. Sensors. 2023. doi:10.3390/s23020605
BibTeX
@article{Matos2023,
author = {Matos, Tiago and Pinto, Vânia and Sousa, Paulo and Martins, Marcos and Fernández, Emilio and Henriques, Renato and Gonçalves, Luis Miguel},
title = {Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23020605}
}
EUVIMED