EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model-Based Damage Localization Using the Particle Swarm Optimization Algorithm and Dynamic Time Wrapping for Pattern Recreation

Ilias Zacharakis iD, Dimitrios Giagopoulos iD

Sensors · 2023

DOI: 10.3390/s23020591 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Ilias Zacharakis und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Western Macedonia, 50100 Kozani, Greece. Hauptthemen laut MEDLINE: Algorithms, Vibration. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vibration-based damage detection methods are a subcategory of Structural Health Monitoring (SHM) methods that rely on the fact that structural damage will affect the dynamic characteristic of a structure. The presented methodology uses Finite Element Models coupled with a metaheuristic optimization algorithm in order to locate the damage in a structure. The search domains of the optimization algorithm are the variables that control a parametric area, which is inserted into the FE model. During the optimization procedure, this area changes location, stiffness, and mass to simulate the effect of the physical damage. The final output is a damaged FE model which can approximate the dynamic response of the damaged structure and indicate the damaged area. For the current implementation of this Damage Detection Framework, the Particle Swarm Optimization algorithm is used. As an effective metric of the comparison between the FE model and the experimental structure, Transmittance Functions (TF) are used that require output only acceleration signals. As with most model-based methods, a common concern is the modeling error and how this can be surpassed. For this reason, the Dynamic Time Wrapping (DTW) algorithm is applied. When damage occurs in a structure it creates some differences between the Transmittance Functions (TF) of the healthy and the damaged state. With the use of DTW, the damaged pattern is recreated around the TF of the FE model, while creating the same differences and, thus, minimizing the modeling error. The effectiveness of the proposed methodology is tested on a small truss structure that consists of Carbon-Fiber Reinforced Polymer (CFRP) filament wound beams and aluminum connectors, where four cases are examined with the damage to be located on the composite material.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlgorithmsVibrationCarbon FiberRecreation

Stichwörter der Autor:innen

damage detectiondamage localizationdynamic time wrappingmetaheuristic algorithmsvibration-based

Substanzen

Carbon Fiber

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Western Macedonia, 50100 Kozani, Greece.
  • Department of Mechanical Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.

ORCID-Profile: Ilias Zacharakis, Dimitrios Giagopoulos

Zitieren

APA

Zacharakis, I., & Giagopoulos, D. (2023). Model-Based Damage Localization Using the Particle Swarm Optimization Algorithm and Dynamic Time Wrapping for Pattern Recreation. Sensors. https://doi.org/10.3390/s23020591

Vancouver

Zacharakis I, Giagopoulos D. Model-Based Damage Localization Using the Particle Swarm Optimization Algorithm and Dynamic Time Wrapping for Pattern Recreation. Sensors. 2023. doi:10.3390/s23020591

BibTeX
@article{Zacharakis2023,
  author = {Zacharakis, Ilias and Giagopoulos, Dimitrios},
  title = {Model-Based Damage Localization Using the Particle Swarm Optimization Algorithm and Dynamic Time Wrapping for Pattern Recreation},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23020591}
}
Kostenlos starten →