Grass Cutting Robot for Inclined Surfaces in Hilly and Mountainous Areas
Sensors · 2023
DOI: 10.3390/s23010528 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Yuki Nishimura und 1 weiteren Autor:innen. Beteiligte Einrichtung: Ph. D. Program in Empowerment Informatics, School of Integrative and Global Majors, University of Tsukuba, Tsukuba 305-8573, Japan. Hauptthemen laut MEDLINE: Robotics. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Grant-in-Aid for JSPS Fellows, Grant-in-Aid for Scientific Research(B), JSPS KAKENHI Grant-in-Aid for scientific Research (B).
Abstract (Originalsprache)
Grass cutting is necessary to prevent grass from diverting essential nutrients and water from crops. Usually, in hilly and mountainous areas, grass cutting is performed on steep slopes with an inclination angle of up to 60° (inclination gradient of 173%). However, such grass cutting tasks are dangerous owing to the unstable positioning of workers. For robots to perform these grass cutting tasks, slipping and falling must be prevented on inclined surfaces. In this study, a robot based on stable propeller control and four-wheel steering was developed to provide stable locomotion during grass cutting tasks. The robot was evaluated in terms of locomotion for different steering methods, straight motion on steep slopes, climbing ability, and coverage area. The results revealed that the robot was capable of navigating uneven terrains with steep slope angles. Moreover, no slipping actions that could have affected the grass cutting operations were observed. We confirmed that the proposed robot is able to cover 99.95% and 98.45% of an area on a rubber and grass slope, respectively. Finally, the robot was tested on different slopes with different angles in hilly and mountainous areas. The developed robot was able to perform the grass cutting task as expected.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Ph. D. Program in Empowerment Informatics, School of Integrative and Global Majors, University of Tsukuba, Tsukuba 305-8573, Japan.
- Faculty of Engineering, Information and Systems, University of Tsukuba, Tsukuba 305-8573, Japan.
ORCID-Profile: Tomoyuki Yamaguchi
Förderung
- Grant-in-Aid for JSPS Fellows
- Grant-in-Aid for Scientific Research(B)
- JSPS KAKENHI Grant-in-Aid for scientific Research (B)
Zitieren
APA
Nishimura, Y., & Yamaguchi, T. (2023). Grass Cutting Robot for Inclined Surfaces in Hilly and Mountainous Areas. Sensors. https://doi.org/10.3390/s23010528
Vancouver
Nishimura Y, Yamaguchi T. Grass Cutting Robot for Inclined Surfaces in Hilly and Mountainous Areas. Sensors. 2023. doi:10.3390/s23010528
BibTeX
@article{Nishimura2023,
author = {Nishimura, Yuki and Yamaguchi, Tomoyuki},
title = {Grass Cutting Robot for Inclined Surfaces in Hilly and Mountainous Areas},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23010528}
}
EUVIMED