EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Three-Dimensional Deformation Inversion in Mining Areas Based on PIM Optimized by CMA-ES and Multi-Source InSAR

Fei Ma, Kangjie Yu, Jianmei Zhang, Jinran Zhang, Wei Lian, Qingbin Zhang, Zhixing Zhao, Haijun Zhang

Remote Sensing · 04.06.2026 · 18 (11) · 1839

DOI: 10.3390/rs18111839 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 04.06.2026. Verfasst von Fei Ma und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Program of Shanxi Province, Fundamental Research Program of Changzhi City, Changzhi Key Laboratory of Intelligent Human–Machine Collaborative Operation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate monitoring of mining-induced three-dimensional surface deformation is critical for safety and environmental protection. Conventional InSAR often loses coherence in high-deformation areas and provides only one-dimensional measurements, while the Probability Integral Model (PIM) suffers from low accuracy at subsidence edges, caused by premature numerical convergence of its error-function-based mathematical formulation—the model prediction rapidly drops to zero and fails to capture subtle real-world deformations in marginal zones. This study developed a fusion method integrating multi-source InSAR (Sentinel-1A and SAOCOM), PIM, and the Covariance Matrix Adaptation Evolution Strategy (CMA-ES). Applied in the Yinying Mining Area, Shanxi Province, the approach combined ascending and descending SAR data processed via SBAS-InSAR, used CMA-ES to optimize PIM parameter inversion, and employed a zonal fusion strategy to reconstruct complete deformation fields. The method demonstrated substantial improvement in monitoring accuracy, with mean absolute errors in the vertical, north–south, and east–west directions reduced by more than 86% compared with the standalone PIM model in edge zones. The fusion approach effectively captured both large-magnitude center deformations and subtle edge displacements. Multi-source data fusion with intelligent optimization algorithms significantly enhances the accuracy of 3D deformation monitoring in mining areas, providing reliable technical support for safety management and environmental protection.

Förderung

  • Fundamental Research Program of Shanxi Province
  • Fundamental Research Program of Changzhi City
  • Changzhi Key Laboratory of Intelligent Human–Machine Collaborative Operation

Zitieren

APA

Ma, F., Yu, K., Zhang, J., Zhang, J., Lian, W., Zhang, Q., Zhao, Z., & Zhang, H. (2026). Study on Three-Dimensional Deformation Inversion in Mining Areas Based on PIM Optimized by CMA-ES and Multi-Source InSAR. Remote Sensing, 18(11), 1839. https://doi.org/10.3390/rs18111839

Vancouver

Ma F, Yu K, Zhang J, Zhang J, Lian W, Zhang Q, et al. Study on Three-Dimensional Deformation Inversion in Mining Areas Based on PIM Optimized by CMA-ES and Multi-Source InSAR. Remote Sensing. 2026;18(11):1839. doi:10.3390/rs18111839

BibTeX
@article{Ma2026,
  author = {Ma, Fei and Yu, Kangjie and Zhang, Jianmei and Zhang, Jinran and Lian, Wei and Zhang, Qingbin and Zhao, Zhixing and Zhang, Haijun},
  title = {Study on Three-Dimensional Deformation Inversion in Mining Areas Based on PIM Optimized by CMA-ES and Multi-Source InSAR},
  journal = {Remote Sensing},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1839},
  doi = {10.3390/rs18111839}
}
Kostenlos starten →