EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FLDSensing: Remote Sensing Flood Inundation Mapping with FLDPLN

Jackson Edwards, Francisco J. Gomez, Son Kim Do, David A. Weiss, Jude Kastens, Sagy Cohen, Hamid Moradkhani, Venkataraman Lakshmi, Xingong Li

Remote Sensing · 04.10.2025 · 17 (19) · 3362

DOI: 10.3390/rs17193362 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 04.10.2025. Verfasst von Jackson Edwards und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Cooperative Institute for Research to Operations in Hydrology (CIROH) through its Summer Institute and Visiting Scholar programs.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flood inundation mapping (FIM), which is essential for effective disaster response and management, requires rapid and accurate delineation of flood extent and depth. Remote sensing FIM, especially using satellite imagery, offers certain capabilities and advantages, but also faces challenges such as cloud and canopy obstructions and flood depth estimation. This research developed a novel hybrid approach, named FLDSensing, which combines remote sensing imagery with the FLDPLN (pronounced “floodplain”) flood inundation model, to improve remote sensing FIM in both inundation extent and depth estimation. The method first identifies clean flood edge pixels (i.e., floodwater pixels next to bare ground), which, combined with the FLDPLN library, are used to estimate the water stages at certain stream pixels. Water stage is further interpolated and smoothed at additional stream pixels, which is then used with an FLDPLN library to generate flood extent and depth maps. The method was applied over the Verdigris River in Kansas to map the flood event that occurred in late May 2019, where Sentinel-2 imagery was used to generate remote sensing FIM and to identify clean water-edge pixels. The results show a significant improvement in FIM accuracy when compared to a HEC-RAS 2D (Version 6.5) benchmark, with the metrics of CSI/POD/FAR/F1-scores reaching 0.89/0.98/0.09/0.94 from 0.55/0.56/0.03/0.71 using remote sensing alone. The method also performed favorably against several existing hybrid approaches, including FLEXTH and FwDET 2.1. This study demonstrates that integrating remote sensing imagery with the FLDPLN model, which uniquely estimates stream stage through floodwater-edges, offers a more effective hybrid approach to enhancing remote sensing-based FIM.

Förderung

  • The Cooperative Institute for Research to Operations in Hydrology (CIROH) through its Summer Institute and Visiting Scholar programs

Zitieren

APA

Edwards, J., Gomez, F. J., Do, S. K., Weiss, D. A., Kastens, J., Cohen, S., Moradkhani, H., Lakshmi, V., & Li, X. (2025). FLDSensing: Remote Sensing Flood Inundation Mapping with FLDPLN. Remote Sensing, 17(19), 3362. https://doi.org/10.3390/rs17193362

Vancouver

Edwards J, Gomez FJ, Do SK, Weiss DA, Kastens J, Cohen S, et al. FLDSensing: Remote Sensing Flood Inundation Mapping with FLDPLN. Remote Sensing. 2025;17(19):3362. doi:10.3390/rs17193362

BibTeX
@article{Edwards2025,
  author = {Edwards, Jackson and Gomez, Francisco J. and Do, Son Kim and Weiss, David A. and Kastens, Jude and Cohen, Sagy and Moradkhani, Hamid and Lakshmi, Venkataraman and Li, Xingong},
  title = {FLDSensing: Remote Sensing Flood Inundation Mapping with FLDPLN},
  journal = {Remote Sensing},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {3362},
  doi = {10.3390/rs17193362}
}
Kostenlos starten →