EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Deformation Monitoring and Prediction of InSAR-Hybrid Deep Learning Model for Subsidence Funnels

Fuqiang Wang, Quanming Liu, Ruiping Li, Sinan Wang, Huiqiang Wang, Junzhi Wang, Xiaoming Ma, Liying Zhou, Yanxin Wang

Remote Sensing · 27.08.2025 · 17 (17) · 2972

DOI: 10.3390/rs17172972 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 27.08.2025. Verfasst von Fuqiang Wang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Inner Mongolia Autonomous Region, State Key Laboratory of Water Engineering Ecology and Environment in Arid Area, Inner Mongolia Agricultural University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mining subsidence is a pervasive geohazard in coal basins, and precise and reliable deformation monitoring is essential to effective risk mitigation. Conventional time-series Interferometric Synthetic Aperture Radar (InSAR) suffers from vegetation-induced decorrelation and atmospheric delays. Most predictive models leverage only temporal information. We introduced an integrated DS InSAR + CNN LSTM framework for subsidence monitoring and forecasting. Forty-three Sentinel-1A scenes (2017–2018), corrected with Generic Atmospheric Correction Online Service for InSAR (GACOS) data, were processed to derive cumulative deformation, cross-validated against multi-view SBAS InSAR, and used to train a CNN LSTM network that predicts trends one year in advance. The findings indicate that (1) DS InSAR provides 2.83 times the monitoring density of SBAS InSAR, with deformation rate R2 = 0.83, RMSE = 0.0028 m/a, and MAE = 0.0019 m/a at common pixels. The RMS average decrease in GACOS atmospheric delay phase correction is 2.52 mm. (2) High- and low-settlement zones comprise 0.11% and 92.32% of the area, respectively; maximum velocity reaches 190.61 mm/a, with a cumulative subsidence of −338.33 mm. (3) Across the five zones with the most severe subsidence, the CNN–LSTM model attains R2 values of 0.97–0.99 and RMSE below 1 mm, markedly outperforming the standalone LSTM network. (4) Deformation correlated strongly with geological structures, groundwater decline (R2 = 0.66–0.78), and precipitation (slope > 0.33), highlighting coupled natural and anthropogenic control.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Inner Mongolia Autonomous Region
  • State Key Laboratory of Water Engineering Ecology and Environment in Arid Area, Inner Mongolia Agricultural University

Zitieren

APA

Wang, F., Liu, Q., Li, R., Wang, S., Wang, H., Wang, J., Ma, X., Zhou, L., & Wang, Y. (2025). Surface Deformation Monitoring and Prediction of InSAR-Hybrid Deep Learning Model for Subsidence Funnels. Remote Sensing, 17(17), 2972. https://doi.org/10.3390/rs17172972

Vancouver

Wang F, Liu Q, Li R, Wang S, Wang H, Wang J, et al. Surface Deformation Monitoring and Prediction of InSAR-Hybrid Deep Learning Model for Subsidence Funnels. Remote Sensing. 2025;17(17):2972. doi:10.3390/rs17172972

BibTeX
@article{Wang2025,
  author = {Wang, Fuqiang and Liu, Quanming and Li, Ruiping and Wang, Sinan and Wang, Huiqiang and Wang, Junzhi and Ma, Xiaoming and Zhou, Liying and Wang, Yanxin},
  title = {Surface Deformation Monitoring and Prediction of InSAR-Hybrid Deep Learning Model for Subsidence Funnels},
  journal = {Remote Sensing},
  year = {2025},
  volume = {17},
  number = {17},
  pages = {2972},
  doi = {10.3390/rs17172972}
}
Kostenlos starten →