Kohler-Polarization Sensor for Glint Removal in Water-Leaving Radiance Measurement
Remote Sensing · 06.06.2025 · 17 (12) · 1977
DOI: 10.3390/rs17121977 ↗Kurz gefasst
Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 06.06.2025. Verfasst von Shuangkui Liu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National key research and development plan project of China.
Abstract (Originalsprache)
High-precision hyperspectral remote sensing reflectance measurement of water bodies serves as the fundamental technical basis for accurately retrieving spatiotemporal distribution characteristics of water quality parameters, providing critical data support for dynamic monitoring of aquatic ecosystems and pollution source tracing. To address the critical issue of water surface glint interference significantly affecting measurement accuracy in aquatic remote sensing, this study innovatively developed a novel sensor system based on multi-field-of-view Kohler-polarization technology. The system incorporates three Kohler illumination lenses with exceptional surface uniformity exceeding 98.2%, effectively eliminating measurement errors caused by water surface brightness inhomogeneity. By integrating three core technologies—multi-field polarization measurement, skylight blocking, and high-precision radiometric calibration—into a single spectral measurement unit, the system achieves radiation measurement accuracy better than 3%, overcoming the limitations of traditional single-method glint suppression approaches. A glint removal efficiency (GRE) calculation model was established based on a skylight-blocked approach (SBA) and dual-band power function fitting to systematically evaluate glint suppression performance. Experimental results show that the system achieves GRE values of 93.1%, 84.9%, and 78.1% at ±3°, ±7°, and ±12° field-of-view angles, respectively, demonstrating that the ±3° configuration provides a 9.2% performance improvement over the ±7° configuration. Comparative analysis with dual-band power-law fitting reveals a GRE difference of 2.1% (93.1% vs. 95.2%) at ±3° field-of-view, while maintaining excellent consistency (ΔGRE < 3.2%) and goodness-of-fit (R2 > 0.96) across all configurations. Shipborne experiments verified the system’s advantages in glint suppression (9.2%~15% improvement) and data reliability. This research provides crucial technical support for developing an integrated water remote sensing reflectance monitoring system combining in situ measurements, UAV platforms, and satellite observations, significantly enhancing the accuracy and reliability of ocean color remote sensing data.
Förderung
- National key research and development plan project of China
Zitieren
APA
Liu, S., Lin, Y., Jiang, Y., Cao, Y., Zhou, J., Dong, H., Liu, X., Wang, Z., & Ye, X. (2025). Kohler-Polarization Sensor for Glint Removal in Water-Leaving Radiance Measurement. Remote Sensing, 17(12), 1977. https://doi.org/10.3390/rs17121977
Vancouver
Liu S, Lin Y, Jiang Y, Cao Y, Zhou J, Dong H, et al. Kohler-Polarization Sensor for Glint Removal in Water-Leaving Radiance Measurement. Remote Sensing. 2025;17(12):1977. doi:10.3390/rs17121977
BibTeX
@article{Liu2025,
author = {Liu, Shuangkui and Lin, Yuchen and Jiang, Ye and Cao, Yuan and Zhou, Jun and Dong, Hang and Liu, Xu and Wang, Zhe and Ye, Xin},
title = {Kohler-Polarization Sensor for Glint Removal in Water-Leaving Radiance Measurement},
journal = {Remote Sensing},
year = {2025},
volume = {17},
number = {12},
pages = {1977},
doi = {10.3390/rs17121977}
}
EUVIMED