EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Signal-to-Noise Ratio Model and Imaging Performance Analysis of Photonic Integrated Interferometric System for Remote Sensing

Chuang Zhang, Yan He, Qinghua Yu

Remote Sensing · 22.04.2025 · 17 (9) · 1484

DOI: 10.3390/rs17091484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 22.04.2025. Verfasst von Chuang Zhang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photonic integrated interferometric imaging systems (PIISs) provide a compact solution for high-resolution Earth observation missions with stringent size, weight, and power (SWaP) constraints. As an indirect imaging method, a PIIS exhibits fundamentally different noise response characteristics compared to conventional remote sensing systems, and its imaging performance under practical operational scenarios has not been thoroughly investigated. The primary objective of this paper is to evaluate the operational capabilities of PIISs under remote sensing conditions. We (1) establish a signal-to-noise-ratio model for PIISs with balanced four-quadrature detection, (2) analyze the impacts of intensity noise and turbulent phase noise based on radiative transfer and turbulence models, and (3) simulate imaging performance with WorldView-3-like parameters. The results of the visibility signal-to-noise ratio (SNR) analysis demonstrate that the system’s minimum detectable fringe visibility is inversely proportional to the reciprocal of the sub-aperture intensity signal-to-noise ratio. When the integration time reaches 100 ms, the minimum detectable fringe visibility ranges between 10−2 and 10−3 (at 10 dB system efficiency). Imaging simulations demonstrate that recognizable image reconstruction requires integration times exceeding 10 ms for 10 cm baselines, achieving approximately 25 dB PSNR and 0.8 SSIM at 100 ms integration duration. These results may provide references for potential applications of photonic integrated interferometric imaging systems in remote sensing.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, C., He, Y., & Yu, Q. (2025). Signal-to-Noise Ratio Model and Imaging Performance Analysis of Photonic Integrated Interferometric System for Remote Sensing. Remote Sensing, 17(9), 1484. https://doi.org/10.3390/rs17091484

Vancouver

Zhang C, He Y, Yu Q. Signal-to-Noise Ratio Model and Imaging Performance Analysis of Photonic Integrated Interferometric System for Remote Sensing. Remote Sensing. 2025;17(9):1484. doi:10.3390/rs17091484

BibTeX
@article{Zhang2025,
  author = {Zhang, Chuang and He, Yan and Yu, Qinghua},
  title = {Signal-to-Noise Ratio Model and Imaging Performance Analysis of Photonic Integrated Interferometric System for Remote Sensing},
  journal = {Remote Sensing},
  year = {2025},
  volume = {17},
  number = {9},
  pages = {1484},
  doi = {10.3390/rs17091484}
}
Kostenlos starten →