Plant Height and Soil Compaction in Coffee Crops Based on LiDAR and RGB Sensors Carried by Remotely Piloted Aircraft
Remote Sensing · 17.04.2025 · 17 (8) · 1445
DOI: 10.3390/rs17081445 ↗Kurz gefasst
Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 17.04.2025. Verfasst von Nicole Lopes Bento und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development, Minas Gerais State Research Support Foundation, Brazilian Agricultural Research Company—Coffee Research Consortium.
Abstract (Originalsprache)
Remotely Piloted Aircraft (RPA) as sensor-carrying airborne platforms for indirect measurement of plant physical parameters has been discussed in the scientific community. The utilization of RGB sensors with photogrammetric data processing based on Structure-from-Motion (SfM) and Light Detection and Ranging (LiDAR) sensors for point cloud construction are applicable in this context and can yield high-quality results. In this sense, this study aimed to compare coffee plant height data obtained from RGB/SfM and LiDAR point clouds and to estimate soil compaction through penetration resistance in a coffee plantation located in Minas Gerais, Brazil. A Matrice 300 RTK RPA equipped with a Zenmuse L1 sensor was used, with RGB data processed in PIX4D software (version 4.5.6) and LiDAR data in DJI Terra software (version V4.4.6). Canopy Height Model (CHM) analysis and cross-sectional profile, together with correlation and statistical difference studies between the height data from the two sensors, were conducted to evaluate the RGB sensor’s capability to estimate coffee plant height compared to LiDAR data considered as reference. Based on the height data obtained by the two sensors, soil compaction in the coffee plantation was estimated through soil penetration resistance. The results demonstrated that both sensors provided dense point clouds from which plant height (R2 = 0.72, R = 0.85, and RMSE = 0.44) and soil penetration resistance (R2 = 0.87, R = 0.8346, and RMSE = 0.14 m) were accurately estimated, with no statistically significant differences determined between the analyzed sensor data. It is concluded, therefore, that the use of remote sensing technologies can be employed for accurate estimation of coffee plantation heights and soil compaction, emphasizing a potential pathway for reducing laborious manual field measurements.
Förderung
- National Council for Scientific and Technological Development
- Minas Gerais State Research Support Foundation
- Brazilian Agricultural Research Company—Coffee Research Consortium
- Coordination for the Improvement of Higher Education Personnel
- Graduate Program in Agricultural Engineering (PPGEA/UFLA)
- University of Firenze (UniFI)
- Federal University of Lavras (UFLA)
Zitieren
APA
Bento, N. L., Ferraz, G. A. E. S., Santana, L. S., Faria, R. D. O., Rossi, G., & Bambi, G. (2025). Plant Height and Soil Compaction in Coffee Crops Based on LiDAR and RGB Sensors Carried by Remotely Piloted Aircraft. Remote Sensing, 17(8), 1445. https://doi.org/10.3390/rs17081445
Vancouver
Bento NL, Ferraz GAES, Santana LS, Faria RDO, Rossi G, Bambi G. Plant Height and Soil Compaction in Coffee Crops Based on LiDAR and RGB Sensors Carried by Remotely Piloted Aircraft. Remote Sensing. 2025;17(8):1445. doi:10.3390/rs17081445
BibTeX
@article{Bento2025,
author = {Bento, Nicole Lopes and Ferraz, Gabriel Araújo e Silva and Santana, Lucas Santos and Faria, Rafael de Oliveira and Rossi, Giuseppe and Bambi, Gianluca},
title = {Plant Height and Soil Compaction in Coffee Crops Based on LiDAR and RGB Sensors Carried by Remotely Piloted Aircraft},
journal = {Remote Sensing},
year = {2025},
volume = {17},
number = {8},
pages = {1445},
doi = {10.3390/rs17081445}
}
EUVIMED