EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Effective Quantification of Methane Point-Source Emissions with the Multi-Level Matched Filter from Hyperspectral Imagery

Menglei Liang, Ying Zhang, Liangfu Chen, Jinhua Tao, Meng Fan, Chao Yu

Remote Sensing · 27.02.2025 · 17 (5) · 843

DOI: 10.3390/rs17050843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 27.02.2025. Verfasst von Menglei Liang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Tianfu Yongxing Laboratory Organized Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Methane is a potent greenhouse gas that significantly contributes to global warming, making the accurate quantification of methane emissions essential for climate change mitigation. The traditional matched filter (MF) algorithm, commonly used to derive methane enhancement from hyperspectral satellite data, is limited by its tendency to underestimate methane plumes, especially at higher concentrations. To address this limitation, we proposed a novel approach—the multi-level matched filter (MLMF)—which incorporates unit absorption spectra matching using a radiance look-up table (LUT) and applies piecewise regressions for concentrations above specific thresholds. This methodology offers a more precise distinction between background and plume pixels, reducing noise interference and mitigating the underestimation of high-concentration emissions. The effectiveness of the MLMF was validated through a series of tests, including simulated data tests and controlled release experiments using satellite observations. These validations demonstrated significant improvements in accuracy: In radiance residual tests, relative errors at high concentrations were reduced from up to −30% to within ±5%, and regression slopes improved from 0.89 to 1.00. In simulated data, the MLMF reduced root mean square error (RMSE) from 1563.63 ppm·m to 337.09 ppm·m, and R² values improved from 0.91 to 0.98 for Gaussian plumes. In controlled release experiments, the MLMF significantly enhanced emission rate estimation, improving R2 from 0.71 to 0.96 and reducing RMSE from 92.32 kg/h to 16.10 kg/h. By improving the accuracy of methane detection and emission quantification, the MLMF presents a significant advancement in methane monitoring technologies. The MLMF’s superior accuracy in detecting high-concentration methane plumes enables better identification and quantification of major emission sources. Its compatibility with other techniques and its potential for integration into real-time operational monitoring systems further extend its applicability in supporting evidence-based climate policy development and mitigation strategies.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Tianfu Yongxing Laboratory Organized Research Project

Zitieren

APA

Liang, M., Zhang, Y., Chen, L., Tao, J., Fan, M., & Yu, C. (2025). An Effective Quantification of Methane Point-Source Emissions with the Multi-Level Matched Filter from Hyperspectral Imagery. Remote Sensing, 17(5), 843. https://doi.org/10.3390/rs17050843

Vancouver

Liang M, Zhang Y, Chen L, Tao J, Fan M, Yu C. An Effective Quantification of Methane Point-Source Emissions with the Multi-Level Matched Filter from Hyperspectral Imagery. Remote Sensing. 2025;17(5):843. doi:10.3390/rs17050843

BibTeX
@article{Liang2025,
  author = {Liang, Menglei and Zhang, Ying and Chen, Liangfu and Tao, Jinhua and Fan, Meng and Yu, Chao},
  title = {An Effective Quantification of Methane Point-Source Emissions with the Multi-Level Matched Filter from Hyperspectral Imagery},
  journal = {Remote Sensing},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {843},
  doi = {10.3390/rs17050843}
}
Kostenlos starten →