EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Construction of Mining Subsidence Basin and Inversion of Predicted Subsidence Parameters Based on UAV Photogrammetry Products Considering Horizontal Displacement

Jinqi Zhao, Yufen Niu, Zhengpei Zhou, Zhong Lu, Zhimou Wang, Zhaojiang Zhang, Yiyao Li, Ziheng Ju

Remote Sensing · 17.11.2024 · 16 (22) · 4283

DOI: 10.3390/rs16224283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 17.11.2024. Verfasst von Jinqi Zhao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China (NSFC), Hebei Provincial Department of Education Scientific Research Project, Hebei Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Constructing high-precision subsidence basins is of paramount importance for mining subsidence monitoring. Traditional unmanned aerial vehicle (UAV) photogrammetry techniques typically construct subsidence basins by directly differencing digital elevation models (DEMs) from different monitoring periods. However, this method often neglects the influence of horizontal displacement on the accuracy of the subsidence basin. Taking a mining area in Ordos, Inner Mongolia, as an example, this study employed the normalized cross-correlation (NCC) matching algorithm to extract horizontal displacement information between two epochs of a digital orthophoto map (DOM) and subsequently corrected the horizontal position of the second-epoch DEM. This ensured that the planar positions of ground feature points remained consistent in the DEM before and after subsidence. Based on this, the vertical displacement in the subsidence area (the subsidence basin) was obtained via DEM differencing, and the parameters of the post-correction subsidence basin were inverted using the probability integral method (PIM). The experimental results indicate that (1) the horizontal displacement was influenced by the gully topography, causing the displacement within the working face to be segmented on both sides of the gully; (2) the influence of the terrain on the subsidence basin was significantly reduced after correction; (3) the post-correction surface subsidence curve was smoother than the pre-correction curve, with abrupt error effects markedly diminished; (4) the accuracy of the post-correction subsidence basin increased by 43.12% compared with the total station data; and (5) comparing the measured horizontal displacement curve with that derived using the probability integral method revealed that the horizontal displacement on the side of an old goaf adjacent to the newly excavated working face shifted toward the advancing direction of the new working face as mining progressed. This study provides a novel approach and insights for using low-cost UAVs to construct high-precision subsidence basins.

Förderung

  • Natural Science Foundation of China (NSFC)
  • Hebei Provincial Department of Education Scientific Research Project
  • Hebei Provincial Natural Science Foundation
  • Technologies R&D Program from the Bureau of Science and Technology of Handan

Zitieren

APA

Zhao, J., Niu, Y., Zhou, Z., Lu, Z., Wang, Z., Zhang, Z., Li, Y., & Ju, Z. (2024). Construction of Mining Subsidence Basin and Inversion of Predicted Subsidence Parameters Based on UAV Photogrammetry Products Considering Horizontal Displacement. Remote Sensing, 16(22), 4283. https://doi.org/10.3390/rs16224283

Vancouver

Zhao J, Niu Y, Zhou Z, Lu Z, Wang Z, Zhang Z, et al. Construction of Mining Subsidence Basin and Inversion of Predicted Subsidence Parameters Based on UAV Photogrammetry Products Considering Horizontal Displacement. Remote Sensing. 2024;16(22):4283. doi:10.3390/rs16224283

BibTeX
@article{Zhao2024,
  author = {Zhao, Jinqi and Niu, Yufen and Zhou, Zhengpei and Lu, Zhong and Wang, Zhimou and Zhang, Zhaojiang and Li, Yiyao and Ju, Ziheng},
  title = {Construction of Mining Subsidence Basin and Inversion of Predicted Subsidence Parameters Based on UAV Photogrammetry Products Considering Horizontal Displacement},
  journal = {Remote Sensing},
  year = {2024},
  volume = {16},
  number = {22},
  pages = {4283},
  doi = {10.3390/rs16224283}
}
Kostenlos starten →