EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reconstruction of Coal Mining Subsidence Field by Fusion of SAR and UAV LiDAR Deformation Data

Bin Yang, Weibing Du, Youfeng Zou, Hebing Zhang, Huabin Chai, Wei Wang, Xiangyang Song, Wenzhi Zhang

Remote Sensing · 12.09.2024 · 16 (18) · 3383

DOI: 10.3390/rs16183383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 12.09.2024. Verfasst von Bin Yang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, PI project of Collaborative Innovation Center of Geo-Information Technology for Smart Central Plains Grant.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The geological environment damage caused by coal mining subsidence has become an important factor affecting the sustainable development of mining areas. Reconstruction of the Coal Mining Subsidence Field (CMSF) is the key to preventing geological disasters, and the needs of CMSF reconstruction cannot be met by solely relying on a single remote sensing technology. The combination of Unmanned Aerial Vehicle (UAV) and Synthetic Aperture Radar (SAR) has complementary advantages; however, the data fusion strategy by refining the SAR deformation field through UAV still needs to be updated constantly. This paper proposed a Prior Weighting (PW) method based on Satellite Aerial (SA) heterogeneous remote sensing. The method can be used to fuse SAR and UAV Light Detection and Ranging (LiDAR) data for ground subsidence parameter inversion. Firstly, the subsidence boundary of Differential Interferometric SAR (DInSAR) combined with the large gradient subsidence of Pixel Offset Tracking (POT) was developed to initialize the SAR preliminary CMSF. Secondly, the SAR preliminary CMSF was refined by UAV LiDAR data; the weights of SAR and UAV LiDAR data are 0.4 and 0.6 iteratively. After the data fusion, the subsidence field was reconstructed. The results showed that the overall CMSF accuracy improved from ±144 mm to ±51 mm. The relative errors of the surface subsidence factor and main influence angle tangent calculated by the physical model and in situ measured data are 1.3% and 1.7%. It shows that the proposed SAR/UAV fusion method has significant advantages in the reconstruction of CMSF, and the PW method contributes to the prevention and control of mining subsidence.

Förderung

  • National Natural Science Foundation of China
  • PI project of Collaborative Innovation Center of Geo-Information Technology for Smart Central Plains Grant

Zitieren

APA

Yang, B., Du, W., Zou, Y., Zhang, H., Chai, H., Wang, W., Song, X., & Zhang, W. (2024). Reconstruction of Coal Mining Subsidence Field by Fusion of SAR and UAV LiDAR Deformation Data. Remote Sensing, 16(18), 3383. https://doi.org/10.3390/rs16183383

Vancouver

Yang B, Du W, Zou Y, Zhang H, Chai H, Wang W, et al. Reconstruction of Coal Mining Subsidence Field by Fusion of SAR and UAV LiDAR Deformation Data. Remote Sensing. 2024;16(18):3383. doi:10.3390/rs16183383

BibTeX
@article{Yang2024,
  author = {Yang, Bin and Du, Weibing and Zou, Youfeng and Zhang, Hebing and Chai, Huabin and Wang, Wei and Song, Xiangyang and Zhang, Wenzhi},
  title = {Reconstruction of Coal Mining Subsidence Field by Fusion of SAR and UAV LiDAR Deformation Data},
  journal = {Remote Sensing},
  year = {2024},
  volume = {16},
  number = {18},
  pages = {3383},
  doi = {10.3390/rs16183383}
}
Kostenlos starten →