EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Operational Forest-Fire Spread Forecasting Using the WRF-SFIRE Model

Manish P. Kale, Sri Sai Meher, Manoj Chavan, Vikas Kumar, Md. Asif Sultan, Priyanka Dongre, Karan Narkhede, Jitendra Mhatre, Narpati Sharma, Bayvesh Luitel, Ningwa Limboo, Mahendra Baingne und 15 weitere

Remote Sensing · 06.07.2024 · 16 (13) · 2480

DOI: 10.3390/rs16132480 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 06.07.2024. Verfasst von Manish P. Kale und 26 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: R&D of IT Group, ITEA division, Ministry of Electronics and Information Technology, Govt. of India—vide.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present research, the open-source WRF-SFIRE model has been used to carry out surface forest fire spread forecasting in the North Sikkim region of the Indian Himalayas. Global forecast system (GFS)-based hourly forecasted weather model data obtained through the National Centers for Environmental Prediction (NCEP) at 0.25 degree resolution were used to provide the initial conditions for running WRF-SFIRE. A landuse–landcover map at 1:10,000 scale was used to define fuel parameters for different vegetation types. The fuel parameters, i.e., fuel depth and fuel load, were collected from 23 sample plots (0.1 ha each) laid down in the study area. Samples of different categories of forest fuels were measured for their wet and dry weights to obtain the fuel load. The vegetation specific surface area-to-volume ratio was referenced from the literature. The atmospheric data were downscaled using nested domains in the WRF model to capture fire–atmosphere interactions at a finer resolution (40 m). VIIRS satellite sensor-based fire alert (375 m spatial resolution) was used as ignition initiation point for the fire spread forecasting, whereas the forecasted hourly weather data (time synchronized with the fire alert) were used for dynamic forest-fire spread forecasting. The forecasted burnt area (1.72 km2) was validated against the satellite-based burnt area (1.07 km2) obtained through Sentinel 2 satellite data. The shapes of the original and forecasted burnt areas matched well. Based on the various simulation studies conducted, an operational fire spread forecasting system, i.e., Sikkim Wildfire Forecasting and Monitoring System (SWFMS), has been developed to facilitate firefighting agencies to issue early warnings and carry out strategic firefighting.

Förderung

  • R&D of IT Group, ITEA division, Ministry of Electronics and Information Technology, Govt. of India—vide

Zitieren

APA

Kale, M. P., Meher, S. S., Chavan, M., Kumar, V., Sultan, M. A., Dongre, P., Narkhede, K., Mhatre, J., Sharma, N., Luitel, B., Limboo, N., Baingne, M., Pardeshi, S., Labade, M., Mukherjee, A., Joshi, U., Kharkar, N., Islam, S., Pokale, S., …, & Roy, P. S. (2024). Operational Forest-Fire Spread Forecasting Using the WRF-SFIRE Model. Remote Sensing, 16(13), 2480. https://doi.org/10.3390/rs16132480

Vancouver

Kale MP, Meher SS, Chavan M, Kumar V, Sultan MA, Dongre P, et al. Operational Forest-Fire Spread Forecasting Using the WRF-SFIRE Model. Remote Sensing. 2024;16(13):2480. doi:10.3390/rs16132480

BibTeX
@article{Kale2024,
  author = {Kale, Manish P. and Meher, Sri Sai and Chavan, Manoj and Kumar, Vikas and Sultan, Md. Asif and Dongre, Priyanka and Narkhede, Karan and Mhatre, Jitendra and Sharma, Narpati and Luitel, Bayvesh and Limboo, Ningwa and Baingne, Mahendra and Pardeshi, Satish and Labade, Mohan and Mukherjee, Aritra and Joshi, Utkarsh and Kharkar, Neelesh and Islam, Sahidul and Pokale, Sagar and Thakare, Gokul and Talekar, Shravani and Behera, Mukunda-Dev and Sreshtha, D. and Khare, Manoj and Kaginalkar, Akshara and Kumar, Naveen and Roy, Parth Sarathi},
  title = {Operational Forest-Fire Spread Forecasting Using the WRF-SFIRE Model},
  journal = {Remote Sensing},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {2480},
  doi = {10.3390/rs16132480}
}
Kostenlos starten →