EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Precision Monitoring Method for Bridge Deformation Measurement and Error Analysis Based on Terrestrial Laser Scanning

Yin Zhou, Jinyu Zhu, Lidu Zhao, Guotao Hu, Jingzhou Xin, Hong Zhang, Jun Yang

Remote Sensing · 21.06.2024 · 16 (13) · 2263

DOI: 10.3390/rs16132263 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 21.06.2024. Verfasst von Yin Zhou und 6 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ChongQing Postdoctoral Science Foundation, ChongQing Science Fund for Distinguished Young Scholars, Chongqing Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Förderung

  • ChongQing Postdoctoral Science Foundation
  • ChongQing Science Fund for Distinguished Young Scholars
  • Chongqing Natural Science Foundation of China
  • Science and Technology Project of Sichuan Provincial Transportation Department

Zitieren

APA

Zhou, Y., Zhu, J., Zhao, L., Hu, G., Xin, J., Zhang, H., & Yang, J. (2024). High-Precision Monitoring Method for Bridge Deformation Measurement and Error Analysis Based on Terrestrial Laser Scanning. Remote Sensing, 16(13), 2263. https://doi.org/10.3390/rs16132263

Vancouver

Zhou Y, Zhu J, Zhao L, Hu G, Xin J, Zhang H, et al. High-Precision Monitoring Method for Bridge Deformation Measurement and Error Analysis Based on Terrestrial Laser Scanning. Remote Sensing. 2024;16(13):2263. doi:10.3390/rs16132263

BibTeX
@article{Zhou2024,
  author = {Zhou, Yin and Zhu, Jinyu and Zhao, Lidu and Hu, Guotao and Xin, Jingzhou and Zhang, Hong and Yang, Jun},
  title = {High-Precision Monitoring Method for Bridge Deformation Measurement and Error Analysis Based on Terrestrial Laser Scanning},
  journal = {Remote Sensing},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {2263},
  doi = {10.3390/rs16132263}
}
Kostenlos starten →