EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Airborne LiDAR Strip Adjustment Method Based on Point Clouds with Planar Neighborhoods

Zhenxing Sun, Ruofei Zhong, Qiong Wu, Jiao Guo

Remote Sensing · 22.11.2023 · 15 (23) · 5447

DOI: 10.3390/rs15235447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 22.11.2023. Verfasst von Zhenxing Sun und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Technologies Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Airborne light detection and ranging (LiDAR) data are increasingly used in various fields such as topographic mapping, urban planning, and emergency management. A necessary processing step in the application of airborne LiDAR data is the elimination of mismatch errors. This paper proposes a new method for airborne LiDAR strip adjustment based on point clouds with planar neighborhoods; this method is intended to eliminate errors in airborne LiDAR point clouds. Initially, standard pre-processing tasks such as denoising, ground separation, and resampling are performed on the airborne LiDAR point clouds. Subsequently, this paper introduces a unique approach to extract point clouds with planar neighborhoods which is designed to enhance the registration accuracy of the iterative closest point (ICP) algorithm within the context of airborne LiDAR point clouds. Following the registration of the point clouds using the ICP algorithm, tie points are extracted via a point-to-plane projection method. Finally, a strip adjustment calculation is executed using the extracted tie points, in accordance with the strip adjustment equation for airborne LiDAR point clouds that was derived in this study. Three sets of airborne LiDAR point cloud data were utilized in the experiment outlined in this paper. The results indicate that the proposed strip adjustment method can effectively eliminate mismatch errors in airborne LiDAR point clouds, achieving a registration accuracy and absolute accuracy of 0.05 m. Furthermore, this method’s processing efficiency was more than five times higher than that of traditional methods such as ICP and LS3D.

Förderung

  • National Key Technologies Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Sun, Z., Zhong, R., Wu, Q., & Guo, J. (2023). Airborne LiDAR Strip Adjustment Method Based on Point Clouds with Planar Neighborhoods. Remote Sensing, 15(23), 5447. https://doi.org/10.3390/rs15235447

Vancouver

Sun Z, Zhong R, Wu Q, Guo J. Airborne LiDAR Strip Adjustment Method Based on Point Clouds with Planar Neighborhoods. Remote Sensing. 2023;15(23):5447. doi:10.3390/rs15235447

BibTeX
@article{Sun2023,
  author = {Sun, Zhenxing and Zhong, Ruofei and Wu, Qiong and Guo, Jiao},
  title = {Airborne LiDAR Strip Adjustment Method Based on Point Clouds with Planar Neighborhoods},
  journal = {Remote Sensing},
  year = {2023},
  volume = {15},
  number = {23},
  pages = {5447},
  doi = {10.3390/rs15235447}
}
Kostenlos starten →