Geometric Quality Assessment of Prefabricated Steel Box Girder Components Using 3D Laser Scanning and Building Information Model
Remote Sensing · 17.01.2023 · 15 (3) · 556
DOI: 10.3390/rs15030556 ↗Kurz gefasst
Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 17.01.2023. Verfasst von Yi Tan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for Basic and Applied Basic Research of Guangdong Province.
Abstract (Originalsprache)
Prefabricated steel box girders (SBGs) are widely adopted in bridge engineering due to their light weight and low lifecycle cost. To smoothly assemble SBG components on a construction site, it is necessary to inspect their geometric quality and ensure that all the as-is SBG components have the correct dimensions. However, the traditional inspection method is time-consuming and error-prone. This study developed a non-contact geometric quality assessment technique based on 3D laser scanning to accurately assess the locations and dimensions of SBG components. First, a robust normal-based region-growing algorithm was developed to divide the SBG components into segments with different labels. The scanned data related to the T ribs were then extracted through the proposed subtraction algorithm after the identification of the steel cabin. Lastly, the required items for geometric quality inspection were calculated based on the extracted as-is SBG components. The feasibility of the proposed geometric quality assessment method was validated through a real SBG project. Field test results showed that the developed inspection technique could assess the geometric quality of prefabricated SBG components in a more accurate and efficient manner compared to traditional measurement approaches.
Förderung
- Foundation for Basic and Applied Basic Research of Guangdong Province
Zitieren
APA
Tan, Y., Chen, L., Wang, Q., Li, S., Deng, T., & Tang, D. (2023). Geometric Quality Assessment of Prefabricated Steel Box Girder Components Using 3D Laser Scanning and Building Information Model. Remote Sensing, 15(3), 556. https://doi.org/10.3390/rs15030556
Vancouver
Tan Y, Chen L, Wang Q, Li S, Deng T, Tang D. Geometric Quality Assessment of Prefabricated Steel Box Girder Components Using 3D Laser Scanning and Building Information Model. Remote Sensing. 2023;15(3):556. doi:10.3390/rs15030556
BibTeX
@article{Tan2023,
author = {Tan, Yi and Chen, Limei and Wang, Qian and Li, Shenghan and Deng, Ting and Tang, Dongdong},
title = {Geometric Quality Assessment of Prefabricated Steel Box Girder Components Using 3D Laser Scanning and Building Information Model},
journal = {Remote Sensing},
year = {2023},
volume = {15},
number = {3},
pages = {556},
doi = {10.3390/rs15030556}
}
EUVIMED