EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accuracy Evaluation and Branch Detection Method of 3D Modeling Using Backpack 3D Lidar SLAM and UAV-SfM for Peach Trees during the Pruning Period in Winter

Poching Teng, Yu Zhang, Takayoshi Yamane, Masayuki Kogoshi, Takeshi Yoshida, Tomohiko Ota, Junichi Nakagawa

Remote Sensing · 09.01.2023 · 15 (2) · 408

DOI: 10.3390/rs15020408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 09.01.2023. Verfasst von Poching Teng und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the winter pruning operation of deciduous fruit trees, the number of pruning branches and the structure of the main branches greatly influence the future growth of the fruit trees and the final harvest volume. Terrestrial laser scanning (TLS) is considered a feasible method for the 3D modeling of trees, but it is not suitable for large-scale inspection. The simultaneous localization and mapping (SLAM) technique makes it possible to move the lidar on the ground and model quickly, but it is not useful enough for the accuracy of plant detection. Therefore, in this study, we used UAV-SfM and 3D lidar SLAM techniques to build 3D models for the winter pruning of peach trees. Then, we compared and analyzed these models and further proposed a method to distinguish branches from 3D point clouds by spatial point cloud density. The results showed that the 3D lidar SLAM technique had a shorter modeling time and higher accuracy than UAV-SfM for the winter pruning period of peach trees. The method had the smallest RMSE of 3084 g with an R2 = 0.93 compared to the fresh weight of the pruned branches. In the branch detection part, branches with diameters greater than 3 cm were differentiated successfully, regardless of whether before or after pruning.

Zitieren

APA

Teng, P., Zhang, Y., Yamane, T., Kogoshi, M., Yoshida, T., Ota, T., & Nakagawa, J. (2023). Accuracy Evaluation and Branch Detection Method of 3D Modeling Using Backpack 3D Lidar SLAM and UAV-SfM for Peach Trees during the Pruning Period in Winter. Remote Sensing, 15(2), 408. https://doi.org/10.3390/rs15020408

Vancouver

Teng P, Zhang Y, Yamane T, Kogoshi M, Yoshida T, Ota T, et al. Accuracy Evaluation and Branch Detection Method of 3D Modeling Using Backpack 3D Lidar SLAM and UAV-SfM for Peach Trees during the Pruning Period in Winter. Remote Sensing. 2023;15(2):408. doi:10.3390/rs15020408

BibTeX
@article{Teng2023,
  author = {Teng, Poching and Zhang, Yu and Yamane, Takayoshi and Kogoshi, Masayuki and Yoshida, Takeshi and Ota, Tomohiko and Nakagawa, Junichi},
  title = {Accuracy Evaluation and Branch Detection Method of 3D Modeling Using Backpack 3D Lidar SLAM and UAV-SfM for Peach Trees during the Pruning Period in Winter},
  journal = {Remote Sensing},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {408},
  doi = {10.3390/rs15020408}
}
Kostenlos starten →