EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Compact Rolling Element Eccentric Planetary Gearbox Design for Lightweight and Backdrivable Wearable Robots Actuators

Riccardo Bezzini, Simon Fritsch, Giulia Bassani, Carlo Alberto Avizzano, Alessandro Filippeschi

Robotics · 22.08.2026 · 15 (9) · 162

DOI: 10.3390/robotics15090162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Robotics, online erschienen am 22.08.2026. Verfasst von Riccardo Bezzini und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union—NextGenerationEU, Ministry of Research and University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wearable assistive exoskeletons require lightweight, compact, and backdrivable transmission systems with low output impedance to ensure safe and comfortable human–robot interaction. These efficient, modular actuators benefit from reduction mechanisms that minimize axial bulk while providing high motion regularity. While existing transmissions perform well on some of these metrics, their practical implementation is often constrained by geometric complexity, low backdrivability, limited reduction ratios, or standard component sizes. This paper presents a novel combination of a Rolling Element Eccentric (REE) stage and a planetary gearbox, specifically designed for wearable exoskeleton actuation. The proposed architecture integrates a bearing-based REE drive concentrically within the sun gear of a planetary transmission, reducing mechanical complexity and friction and improving regularity. Moreover, the design exploits additively manufactured bearings, enabling substantial weight reduction, reduced encumbrance, and increased design freedom without reliance on standard bearing dimensions. A prototype reducer has been designed and fabricated using additive manufacturing techniques. It was experimentally evaluated and compared with state-of-the-art transmission designs. These investigations demonstrated low friction, minimal backlash, good torsional stiffness, and sufficient backdrivability, despite the high reduction ratio, while maintaining a compact, flat form factor. The experimental results indicate that the proposed rolling element eccentric planetary transmission is a viable and effective solution for lightweight, efficient, axially compact (independently of the implemented reduction ratio), and backdrivable actuators in assistive wearable robotics.

Förderung

  • European Union—NextGenerationEU
  • Ministry of Research and University

Zitieren

APA

Bezzini, R., Fritsch, S., Bassani, G., Avizzano, C. A., & Filippeschi, A. (2026). A Novel Compact Rolling Element Eccentric Planetary Gearbox Design for Lightweight and Backdrivable Wearable Robots Actuators. Robotics, 15(9), 162. https://doi.org/10.3390/robotics15090162

Vancouver

Bezzini R, Fritsch S, Bassani G, Avizzano CA, Filippeschi A. A Novel Compact Rolling Element Eccentric Planetary Gearbox Design for Lightweight and Backdrivable Wearable Robots Actuators. Robotics. 2026;15(9):162. doi:10.3390/robotics15090162

BibTeX
@article{Bezzini2026,
  author = {Bezzini, Riccardo and Fritsch, Simon and Bassani, Giulia and Avizzano, Carlo Alberto and Filippeschi, Alessandro},
  title = {A Novel Compact Rolling Element Eccentric Planetary Gearbox Design for Lightweight and Backdrivable Wearable Robots Actuators},
  journal = {Robotics},
  year = {2026},
  volume = {15},
  number = {9},
  pages = {162},
  doi = {10.3390/robotics15090162}
}
Kostenlos starten →