Design of a Wheelchair-Mounted Robotic Arm for Feeding Assistance of Upper-Limb Impaired Patients
Robotics · 26.02.2024 · 13 (3) · 38
DOI: 10.3390/robotics13030038 ↗Kurz gefasst
Fachartikel in der Zeitschrift Robotics, online erschienen am 26.02.2024. Verfasst von Simone Leone und 8 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: project new frontiers in adaptive modular robotics for patient-centred medical rehabilitation—ASKLEPIOS, European Union—NextGenerationEU and Romanian Government, under National Recovery and Resilience Plan for Romania, Romanian Ministry of Research, Innovation and Digitalization, within Component 9, investment I8.
Abstract (Originalsprache)
This paper delineates the design and realization of a Wheelchair-Mounted Robotic Arm (WMRA), envisioned as an autonomous assistance apparatus for individuals encountering motor difficulties and/or upper limb paralysis. The proposed design solution is based on employing a 3D printing process coupled with optimization design techniques to achieve a cost-oriented and user-friendly solution. The proposed design is based on utilizing commercial Arduino control hardware. The proposed device has been named Pick&Eat. The proposed device embodies reliability, functionality, and cost-effectiveness, and features a modular structure housing a 4-degrees-of-freedom robotic arm with a fixing frame that can be attached to commercial wheelchairs. The arm is integrated with an interchangeable end-effector facilitating the use of various tools such as spoons or forks tailored to different food types. Electrical and sensor components were meticulously designed, incorporating sensors to ensure user safety throughout operations. Smooth and secure operations are achieved through a sequential procedure that is depicted in a specific flowchart. Experimental tests have been carried out to demonstrate the engineering feasibility and effectiveness of the proposed design solution as an innovative assistive solution for individuals grappling with upper limb impairment. Its capacity to aid patients during the eating process holds promise for enhancing their quality of life, particularly among the elderly and those with disabilities.
Förderung
- project new frontiers in adaptive modular robotics for patient-centred medical rehabilitation—ASKLEPIOS
- European Union—NextGenerationEU and Romanian Government, under National Recovery and Resilience Plan for Romania
- Romanian Ministry of Research, Innovation and Digitalization, within Component 9, investment I8
- Next Generation EU, PNRR MUR projects AGE-IT
- PNRR MUR
Zitieren
APA
Leone, S., Giunta, L., Rino, V., Mellace, S., Sozzi, A., Lago, F., Curcio, E. M., Pisla, D., & Carbone, G. (2024). Design of a Wheelchair-Mounted Robotic Arm for Feeding Assistance of Upper-Limb Impaired Patients. Robotics, 13(3), 38. https://doi.org/10.3390/robotics13030038
Vancouver
Leone S, Giunta L, Rino V, Mellace S, Sozzi A, Lago F, et al. Design of a Wheelchair-Mounted Robotic Arm for Feeding Assistance of Upper-Limb Impaired Patients. Robotics. 2024;13(3):38. doi:10.3390/robotics13030038
BibTeX
@article{Leone2024,
author = {Leone, Simone and Giunta, Luigi and Rino, Vincenzo and Mellace, Simone and Sozzi, Alessio and Lago, Francesco and Curcio, Elio Matteo and Pisla, Doina and Carbone, Giuseppe},
title = {Design of a Wheelchair-Mounted Robotic Arm for Feeding Assistance of Upper-Limb Impaired Patients},
journal = {Robotics},
year = {2024},
volume = {13},
number = {3},
pages = {38},
doi = {10.3390/robotics13030038}
}
EUVIMED