EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Solar Thermal Resource Continuity in Mexican Climates Using PCM-Based Thermal Energy Storage: Transient Modeling and Performance Comparison

Cintia Monreal Jiménez, Jonathan Rojas Ricca, Robert Jäckel, Joseph Adhemar Araoz Ramos, Guillermo Barrios, Alberto Ramos Blanco, Geydy Gutiérrez-Urueta

Resources · 27.03.2026 · 15 (4) · 51

DOI: 10.3390/resources15040051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Resources, online erschienen am 27.03.2026. Verfasst von Cintia Monreal Jiménez und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The variability of solar energy limits its reliability as a thermal resource, motivating the use of thermal energy storage (TES) to extend heat availability beyond periods of direct irradiance. This study numerically compares latent and sensible TES integrated into a solar dish system from a resource-oriented perspective across representative Mexican climates. Rather than focusing only on stored energy, the analysis evaluates how each storage strategy affects the temporal availability and post-irradiation persistence of usable thermal energy over 24 h charge–discharge cycles. A salt-based PCM (58.1LiNO3–41.9KCl) was assessed against steel-based sensible storage under identical operating conditions. Under average-day forcing, the minimum PCM mass required to effectively utilize latent heat while sustaining a 320 W test load was found to be 13 kg. Under these conditions, the PCM case showed smoother thermal transients and longer post-irradiation energy availability, enabling nocturnal operation. In contrast, a mass-matched 13 kg steel store showed negligible post-irradiation availability, while a volume-matched 55 kg steel configuration achieved similar nocturnal operation only by substantially increasing mass, with limited improvement in accumulated energy. Hot-day forcing extended the operating window, whereas cold-day forcing yielded negligible charging so that operation could not be sustained within a single daily cycle.

Zitieren

APA

Jiménez, C. M., Ricca, J. R., Jäckel, R., Ramos, J. A. A., Barrios, G., Blanco, A. R., & Gutiérrez-Urueta, G. (2026). Enhancing Solar Thermal Resource Continuity in Mexican Climates Using PCM-Based Thermal Energy Storage: Transient Modeling and Performance Comparison. Resources, 15(4), 51. https://doi.org/10.3390/resources15040051

Vancouver

Jiménez CM, Ricca JR, Jäckel R, Ramos JAA, Barrios G, Blanco AR, et al. Enhancing Solar Thermal Resource Continuity in Mexican Climates Using PCM-Based Thermal Energy Storage: Transient Modeling and Performance Comparison. Resources. 2026;15(4):51. doi:10.3390/resources15040051

BibTeX
@article{Jimnez2026,
  author = {Jiménez, Cintia Monreal and Ricca, Jonathan Rojas and Jäckel, Robert and Ramos, Joseph Adhemar Araoz and Barrios, Guillermo and Blanco, Alberto Ramos and Gutiérrez-Urueta, Geydy},
  title = {Enhancing Solar Thermal Resource Continuity in Mexican Climates Using PCM-Based Thermal Energy Storage: Transient Modeling and Performance Comparison},
  journal = {Resources},
  year = {2026},
  volume = {15},
  number = {4},
  pages = {51},
  doi = {10.3390/resources15040051}
}
Kostenlos starten →