EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experience in Processing Alternative Crude Oils to Replace Design Oil in the Refinery

Dicho Stratiev, Ivelina Shiskova, Vesislava Toteva, Georgi Georgiev, Rosen Dinkov, Iliyan Kolev, Ivan Petrov, Georgi Argirov, Veselina Bureva, Simeon Ribagin, Krassimir Atanassov, Svetoslav Nenov und 3 weitere

Resources · 20.06.2024 · 13 (6) · 86

DOI: 10.3390/resources13060086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Resources, online erschienen am 20.06.2024. Verfasst von Dicho Stratiev und 14 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s NextGenerationEU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A comprehensive investigation of a highly complex petroleum refinery (Nelson complexity index of 10.7) during the processing of 11 crude oils and an imported atmospheric residue replacing the design Urals crude oil was performed. Various laboratory oil tests were carried out to characterize both crude oils, and their fractions. The results of oil laboratory assays along with intercriteria and regression analyses were employed to find quantitative relations between crude oil mixture quality and refining unit performance. It was found that the acidity of petroleum cannot be judged by its total acid number, and acid crudes with lower than 0.5 mg KOH/g and low sulphur content required repeated caustic treatment enhancement and provoked increased corrosion rate and sodium contamination of the hydrocracking catalyst. Increased fouling in the H-Oil hydrocracker was observed during the transfer of design Urals crude oil to other petroleum crudes. The vacuum residues with higher sulphur, lower nitrogen contents, and a lower colloidal instability index provide a higher conversion rate and lower fouling rate in the H-Oil unit. The regression equations developed in this work allow quantitative assessment of the performance of crucial refining units like the H-Oil, fluid catalytic cracker, naphtha reformer, and gas oil hydrotreatment based on laboratory oil test results.

Förderung

  • European Union’s NextGenerationEU

Zitieren

APA

Stratiev, D., Shiskova, I., Toteva, V., Georgiev, G., Dinkov, R., Kolev, I., Petrov, I., Argirov, G., Bureva, V., Ribagin, S., Atanassov, K., Nenov, S., Sotirov, S., Nikolova, R., & Veli, A. (2024). Experience in Processing Alternative Crude Oils to Replace Design Oil in the Refinery. Resources, 13(6), 86. https://doi.org/10.3390/resources13060086

Vancouver

Stratiev D, Shiskova I, Toteva V, Georgiev G, Dinkov R, Kolev I, et al. Experience in Processing Alternative Crude Oils to Replace Design Oil in the Refinery. Resources. 2024;13(6):86. doi:10.3390/resources13060086

BibTeX
@article{Stratiev2024,
  author = {Stratiev, Dicho and Shiskova, Ivelina and Toteva, Vesislava and Georgiev, Georgi and Dinkov, Rosen and Kolev, Iliyan and Petrov, Ivan and Argirov, Georgi and Bureva, Veselina and Ribagin, Simeon and Atanassov, Krassimir and Nenov, Svetoslav and Sotirov, Sotir and Nikolova, Radoslava and Veli, Anife},
  title = {Experience in Processing Alternative Crude Oils to Replace Design Oil in the Refinery},
  journal = {Resources},
  year = {2024},
  volume = {13},
  number = {6},
  pages = {86},
  doi = {10.3390/resources13060086}
}
Kostenlos starten →