Recovery of Platinum Group Metals from Spent Automotive Catalysts: A Review of Metallurgical and Emerging Methods
Recycling · 26.10.2026 · 11 (11) · 194
DOI: 10.3390/recycling11110194 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recycling, online erschienen am 26.10.2026. Verfasst von Eldar Kopishev und 4 weiteren Autor:innen. Die Arbeit nennt 160 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Platinum group metals (PGMs) are key components of automotive emission-control catalysts, and spent automotive catalysts (SACs) are their main secondary source. This paper reviews hydrometallurgical, pyrometallurgical, magnetic-separation, biometallurgical, and ionic-liquid/deep-eutectic-solvent (IL/DES) routes and compares them for recovery, selectivity, energy demand, reagent hazard, technology readiness, and scalability, using values re-checked against accessible primary sources. Smelting with Cu- or Fe-based collectors is the only fully industrial route and gives the highest reported recoveries (≈90–99% for Pt and Pd and ≈85–98% for Rh). Hydrometallurgical leaching operates at lower temperature and separates the individual metals but relies on corrosive reagents and dissolves rhodium slowly. Magnetic-separation methods are pre-concentration steps, and biometallurgical and IL/DES routes remain at laboratory scale; their environmental performance has not yet been established by life-cycle assessment. A paired comparison of Rh with Pt and Pd shows that leaching at ≤90 °C typically extracts about 10–60 percentage points less Rh than the best-recovered companion metal, whereas gaps of about 10 points or less are reported for most smelting studies and for some intensified chloride leaching (≥150 °C, alkali calcination, or iron alloying). Integrated flowsheets coupling pretreatment with selective refining remain to be demonstrated at scale and need consistent techno-economic and life-cycle assessment.
Zitieren
APA
Kopishev, E., Bakdauletuly, A., Duisembiyev, M., Mannapova, K. A., & Makhmudova, S. A. (2026). Recovery of Platinum Group Metals from Spent Automotive Catalysts: A Review of Metallurgical and Emerging Methods. Recycling, 11(11), 194. https://doi.org/10.3390/recycling11110194
Vancouver
Kopishev E, Bakdauletuly A, Duisembiyev M, Mannapova KA, Makhmudova SA. Recovery of Platinum Group Metals from Spent Automotive Catalysts: A Review of Metallurgical and Emerging Methods. Recycling. 2026;11(11):194. doi:10.3390/recycling11110194
BibTeX
@article{Kopishev2026,
author = {Kopishev, Eldar and Bakdauletuly, Ayan and Duisembiyev, Marat and Mannapova, Kamola Alimdjanovna and Makhmudova, Shakhnoza Abduvaliyevna},
title = {Recovery of Platinum Group Metals from Spent Automotive Catalysts: A Review of Metallurgical and Emerging Methods},
journal = {Recycling},
year = {2026},
volume = {11},
number = {11},
pages = {194},
doi = {10.3390/recycling11110194}
}
EUVIMED