Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications
Recycling · 12.05.2026 · 11 (5) · 92
DOI: 10.3390/recycling11050092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recycling, online erschienen am 12.05.2026. Verfasst von Maria del Carmen Aragón-Duarte und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretariat of Science, Humanities, Technology and Innovation.
Abstract (Originalsprache)
This study proposes the development of a recycling process for the reintegration of dental zirconia waste into CAD/CAM systems for rapid prototyping, with the objective of demonstrating the feasibility of manufacturing functional products from recycled zirconia obtained from a commercial dental laboratory. The proposed methodology aims to explore a simple and economically viable process, which involves the purification and processing of a heterogeneous zirconia powder, followed by the fabrication of pre-sintered blocks suitable for CAD/CAM applications. The recycled bulk ceramic was characterized and compared with commercial zirconia through density measurements, X-ray diffraction, scanning electron microscopy, Vickers hardness, flexural strength testing, and sintering shrinkage analysis. The results indicated that, although recycled zirconia exhibits lower property values than the commercial reference material, it retains adequate characteristics for specific practical applications. Consequently, to demonstrate industrial feasibility, four components were designed using CAD and machined using CAM from the recycled blocks, simulating a rapid prototyping process. The fabricated components exhibited a smooth and flawless surface, were mechanically robust and solid to the touch, and showed well-defined contours with sharp edges. Dimensional analysis demonstrated high accuracy, with an average percentage error of 0.53% ± 0.14. These findings demonstrate that high-value ceramic waste can be reintegrated into the production chain as functional industrial components through a process that is closely aligned with the real conditions of industrial recycling, while also mitigating environmental contamination from hazardous industrial waste.
Förderung
- Secretariat of Science, Humanities, Technology and Innovation
Zitieren
APA
Aragón-Duarte, M. D. C., Esparza-Ponce, H. E., Tapia-Lopez, L. V., Luna-Velasco, A., Jiménez-Tinoco, L. F., & Castro-Carmona, J. S. (2026). Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications. Recycling, 11(5), 92. https://doi.org/10.3390/recycling11050092
Vancouver
Aragón-Duarte MDC, Esparza-Ponce HE, Tapia-Lopez LV, Luna-Velasco A, Jiménez-Tinoco LF, Castro-Carmona JS. Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications. Recycling. 2026;11(5):92. doi:10.3390/recycling11050092
BibTeX
@article{AragnDuarte2026,
author = {Aragón-Duarte, Maria del Carmen and Esparza-Ponce, Hilda Esperanza and Tapia-Lopez, Lillian Vianey and Luna-Velasco, Antonia and Jiménez-Tinoco, Luis Fernando and Castro-Carmona, Javier Servando},
title = {Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications},
journal = {Recycling},
year = {2026},
volume = {11},
number = {5},
pages = {92},
doi = {10.3390/recycling11050092}
}
EUVIMED