EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Obtaining Biodiesel from Soybean Vegetable Oil Using a Hydrodynamic Cavitation Reactor

Luz Clara Andia-Marron, Jessica Abad-Salcca, Juan Taumaturgo Medina-Collana, Edgar Williams Villanueva-Martinez, Jorge Amador López-Herrera, Richard Brandon Guevara-Salcedo, Leonard Ordoñez-Santa Maria, Rodolfo Paz-Salazar, Fredy Andrés Taipe-Castro, Jorge Alberto Montaño-Pisfil, Segundo Alberto Vásquez-Llanos

Reactions · 06.03.2026 · 7 (1) · 18

DOI: 10.3390/reactions7010018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Reactions, online erschienen am 06.03.2026. Verfasst von Luz Clara Andia-Marron und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Nacional del Callao, Lima, Perú.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrodynamic cavitation (HC) is an efficient technique for biodiesel production. The main contribution of this study is the development of a modular reactor with a universal stainless steel joint, whose design facilitates the installation, replacement, and maintenance of the orifice plate by eliminating flanges and bolts during assembly. Using this reactor, the study evaluated the synergistic interaction between feed pressure and methanol:oil molar ratio in the transesterification of soybean oil, employing a 32 factorial design. The orifice plate was 3 mm thick and had 19 holes with a diameter of 1.0 mm, installed downstream of the pump. The process was carried out for 45 min, using NaOH at 1 wt% relative to the oil and at 60 ± 5 °C. Feed pressures of 1.72, 2.41, and 3.10 bar and methanol:oil molar ratios of 6:1, 8:1, and 10:1 were evaluated, reaching a maximum yield of 92.98% at 3.10 bar and 8:1. Analysis of variance (ANOVA) confirmed a significant interaction (p < 0.0001) and allowed a second-order polynomial model to be fitted (R2 = 0.9981). In contrast, conventional mechanical agitation required 90 min to achieve 95% yield. The biodiesel produced met most American Society for Testing and Materials (ASTM) D6751 requirements, confirming the potential of HC as a viable alternative for intensifying biodiesel production.

Förderung

  • Universidad Nacional del Callao, Lima, Perú

Zitieren

APA

Andia-Marron, L. C., Abad-Salcca, J., Medina-Collana, J. T., Villanueva-Martinez, E. W., López-Herrera, J. A., Guevara-Salcedo, R. B., Maria, L. O., Paz-Salazar, R., Taipe-Castro, F. A., Montaño-Pisfil, J. A., & Vásquez-Llanos, S. A. (2026). Obtaining Biodiesel from Soybean Vegetable Oil Using a Hydrodynamic Cavitation Reactor. Reactions, 7(1), 18. https://doi.org/10.3390/reactions7010018

Vancouver

Andia-Marron LC, Abad-Salcca J, Medina-Collana JT, Villanueva-Martinez EW, López-Herrera JA, Guevara-Salcedo RB, et al. Obtaining Biodiesel from Soybean Vegetable Oil Using a Hydrodynamic Cavitation Reactor. Reactions. 2026;7(1):18. doi:10.3390/reactions7010018

BibTeX
@article{AndiaMarron2026,
  author = {Andia-Marron, Luz Clara and Abad-Salcca, Jessica and Medina-Collana, Juan Taumaturgo and Villanueva-Martinez, Edgar Williams and López-Herrera, Jorge Amador and Guevara-Salcedo, Richard Brandon and Maria, Leonard Ordoñez-Santa and Paz-Salazar, Rodolfo and Taipe-Castro, Fredy Andrés and Montaño-Pisfil, Jorge Alberto and Vásquez-Llanos, Segundo Alberto},
  title = {Obtaining Biodiesel from Soybean Vegetable Oil Using a Hydrodynamic Cavitation Reactor},
  journal = {Reactions},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {18},
  doi = {10.3390/reactions7010018}
}
Kostenlos starten →