Biomechanical Evaluation of CAD/CAM Restorative Materials for Maxillary Second Premolar Crowns Using Three-Dimensional Finite Element Analysis
Prosthesis · 02.11.2026 · 8 (11) · 117
DOI: 10.3390/prosthesis8110117 ↗Kurz gefasst
Fachartikel in der Zeitschrift Prosthesis, online erschienen am 02.11.2026. Verfasst von Deedar Wahhab Kareem und 2 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: This study evaluated how the elastic modulus of CAD/CAM crown materials affects the stress distribution within a maxillary second premolar and its supporting structures.
Methods
A maxillary premolar was digitally reconstructed for finite element analysis. Three crown materials with differing elastic moduli (210, 70, and 37.95 GPa) were modeled under a 300 N static vertical occlusal load, with maximum and minimum principal stresses as the primary outcome measures.
Results
At standardized, mesh-verified probe locations, crown-body stress increased monotonically with material stiffness (zirconia > VITA Suprinity > VITA Enamic): outer axial wall stress was ~60% higher for zirconia (11.4 MPa) than for VITA Enamic (7.0 MPa). In the supporting tooth structures the ordering was reversed, the more compliant crown transferring more stress to the tooth at equivalent locations, with enamel probe stress ~29% and dentin probe stress ~52% higher for VITA Enamic than for zirconia. The crown margin was the only region in which tensile stress approached or exceeded the compressive magnitude, particularly for the stiffer materials.
Conclusions
The elastic modulus of the restorative material significantly influenced the stress state within the crown (differences up to ~60% at equivalent locations), while its influence on the supporting tooth structures, although measurable at equivalent locations, was small in absolute terms (about 1 MPa in dentin and 3 MPa in enamel). This provides biomechanical context to guide clinical material selection.
Zitieren
APA
Kareem, D. W., Talabani, R. M., & Fatalla, A. A. (2026). Biomechanical Evaluation of CAD/CAM Restorative Materials for Maxillary Second Premolar Crowns Using Three-Dimensional Finite Element Analysis. Prosthesis, 8(11), 117. https://doi.org/10.3390/prosthesis8110117
Vancouver
Kareem DW, Talabani RM, Fatalla AA. Biomechanical Evaluation of CAD/CAM Restorative Materials for Maxillary Second Premolar Crowns Using Three-Dimensional Finite Element Analysis. Prosthesis. 2026;8(11):117. doi:10.3390/prosthesis8110117
BibTeX
@article{Kareem2026,
author = {Kareem, Deedar Wahhab and Talabani, Ranjdar Mahmood and Fatalla, Abdalbseet A.},
title = {Biomechanical Evaluation of CAD/CAM Restorative Materials for Maxillary Second Premolar Crowns Using Three-Dimensional Finite Element Analysis},
journal = {Prosthesis},
year = {2026},
volume = {8},
number = {11},
pages = {117},
doi = {10.3390/prosthesis8110117}
}
EUVIMED