Refabrication of a Mandibular Prosthesis Using an Intraoral Scanner and CAD/CAM in a Patient Who Had Undergone Mandibulectomy: A Case Report
Prosthesis · 10.07.2026 · 8 (7) · 72
DOI: 10.3390/prosthesis8070072 ↗Kurz gefasst
Fallbericht in der Zeitschrift Prosthesis, online erschienen am 10.07.2026. Verfasst von Menghan Miao und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tokyo Metropolitan Government, Japan Science and Technology Agency.
Abstract (Originalsprache)
This report describes a 72-year-old patient for whom a maxillofacial prosthesis was created to treat trismus and jaw deviation after mandibulectomy for osteoradionecrosis following radiotherapy for cancer. The patient’s chief complaints were an ill-fitting denture, discomfort, and difficulty with mastication. Clinical examination revealed a right-sided lateral mandibular defect, trismus, and right-sided deviation of mandibular occlusion. The diagnosis was discomfort associated with ill-fitting dentures. A resin-based denture was created using the piezography technique. Although the patient was satisfied wearing the new resin-based prosthesis, it was thin because of the limited denture space and developed a fracture. Thereafter, a metal-based denture was fabricated. Digital impressions were obtained with an intraoral scanner. A prosthesis with a metal framework as an internal support was recreated using CAD/CAM technology. This case report demonstrates the feasibility of a digital workflow for prosthesis refabrication in a patient with complex mandibular defects.
Förderung
- Tokyo Metropolitan Government
- Japan Science and Technology Agency
Zitieren
APA
Miao, M., Sumita, Y., Hattori, M., Yamatani, Y., & Wakabayashi, N. (2026). Refabrication of a Mandibular Prosthesis Using an Intraoral Scanner and CAD/CAM in a Patient Who Had Undergone Mandibulectomy: A Case Report. Prosthesis, 8(7), 72. https://doi.org/10.3390/prosthesis8070072
Vancouver
Miao M, Sumita Y, Hattori M, Yamatani Y, Wakabayashi N. Refabrication of a Mandibular Prosthesis Using an Intraoral Scanner and CAD/CAM in a Patient Who Had Undergone Mandibulectomy: A Case Report. Prosthesis. 2026;8(7):72. doi:10.3390/prosthesis8070072
BibTeX
@article{Miao2026,
author = {Miao, Menghan and Sumita, Yuka and Hattori, Mariko and Yamatani, Yuichi and Wakabayashi, Noriyuki},
title = {Refabrication of a Mandibular Prosthesis Using an Intraoral Scanner and CAD/CAM in a Patient Who Had Undergone Mandibulectomy: A Case Report},
journal = {Prosthesis},
year = {2026},
volume = {8},
number = {7},
pages = {72},
doi = {10.3390/prosthesis8070072}
}
EUVIMED