EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Bottom Geometry on the Hydrodynamic Behavior of a Stirred Tank

Israel Gonzalez-Neria, Sergio Alejandro Martínez-Delgadillo, Alejandro Alonzo-García, Juan Antonio Yáñez-Varela, Gabriela Rivadeneyra-Romero, José Raúl Miranda-Tello

Processes · 20.11.2026 · 14 (22) · 3737

DOI: 10.3390/pr14223737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 20.11.2026. Verfasst von Israel Gonzalez-Neria und 5 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stirred tanks are widely used throughout the process industry. While extensive efforts have been made to improve their operational efficiency—primarily through the design of novel impellers—modifications to the underlying tank geometry remain underexplored. Previous geometric studies have predominantly examined rectangular tanks or minor bottom profile adjustments; however, systematic evaluations of specific profile modifications remain scarce. Consequently, this study focuses on the tank bottom profile by introducing corner curvature radii (ranging from 15 mm to 120 mm) and systematically evaluating their effect on the reactor’s hydrodynamic performance. The investigation was conducted using computational fluid dynamics, and the numerical data were validated against particle image velocimetry measurements. The results demonstrate that the tank bottom radius significantly alters the lateral recirculation loops, expanding them vertically by up to 22% relative to the flat-bottom baseline. Additionally, the modified profile induces a velocity increase of up to 6% in the x-y plane. Turbulent kinetic energy rises by up to 5.5% in the x-y plane and by 59% within the bulk zone of the x-z plane relative to the flat-bottom baseline. Concurrently, the turbulent kinetic energy dissipation rate decreases by up to 12% in the x-y plane, yet exhibits a 43% increase within the bulk zone of the x-z plane relative to the flat-bottom baseline. Ultimately, these findings demonstrate that global hydrodynamic behavior can be substantially tailored through targeted modifications to the tank bottom profile.

Zitieren

APA

Gonzalez-Neria, I., Martínez-Delgadillo, S. A., Alonzo-García, A., Yáñez-Varela, J. A., Rivadeneyra-Romero, G., & Miranda-Tello, J. R. (2026). Effect of Bottom Geometry on the Hydrodynamic Behavior of a Stirred Tank. Processes, 14(22), 3737. https://doi.org/10.3390/pr14223737

Vancouver

Gonzalez-Neria I, Martínez-Delgadillo SA, Alonzo-García A, Yáñez-Varela JA, Rivadeneyra-Romero G, Miranda-Tello JR. Effect of Bottom Geometry on the Hydrodynamic Behavior of a Stirred Tank. Processes. 2026;14(22):3737. doi:10.3390/pr14223737

BibTeX
@article{GonzalezNeria2026,
  author = {Gonzalez-Neria, Israel and Martínez-Delgadillo, Sergio Alejandro and Alonzo-García, Alejandro and Yáñez-Varela, Juan Antonio and Rivadeneyra-Romero, Gabriela and Miranda-Tello, José Raúl},
  title = {Effect of Bottom Geometry on the Hydrodynamic Behavior of a Stirred Tank},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {22},
  pages = {3737},
  doi = {10.3390/pr14223737}
}
Kostenlos starten →