EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Resolution Controls in 3-D Elastic-Wave Computed Tomography: Coupled Geometry–Target Effects and Resolution Scaling

Zhengcai Li, Yong Wang, Chao Zheng, Hao Wu, Zhenbao Xu, Xiaoyu Ning, Lizhi Du

Processes · 16.11.2026 · 14 (22) · 3686

DOI: 10.3390/pr14223686 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 16.11.2026. Verfasst von Zhengcai Li und 6 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional elastic-wave computed tomography depends on acquisition sampling, directional coverage, and target characteristics. This study examines their coupled effects using first-arrival modeling with the Fast Sweeping Method and inversion with the Simultaneous Iterative Reconstruction Technique. Cubic models with side lengths of 12 or 24 m were used to assess ray-set density, borehole configuration, excitation spacing, target size, velocity contrast, target position, and directional supplementation. Reconstruction was evaluated using the corrected recovery ratio, normalized maximum boundary offset, and relative velocity error. In the noise-free fixed-target comparisons, the largest gains occurred between sparse and moderate sampling. Excitation spacing no greater than half the target side length was associated with improved recovery metrics in these series, but identical ratios yielded different results across configurations. Targeted diagonal supplementation increased the corrected recovery ratio by 13.3% relative to the baseline, although its boundary offset increased. Reference-matrix analysis distinguished increased target illumination from improved global spectral properties. Threshold, traveltime-error, initial-model, and iteration-count tests showed that comparative advantages depend on the metric and test conditions. The results support a geometry–target framework for assessing acquisition design within the tested numerical settings, while not establishing universal sampling thresholds for heterogeneous field environments.

Förderung

  • National Key Research and Development Project

Zitieren

APA

Li, Z., Wang, Y., Zheng, C., Wu, H., Xu, Z., Ning, X., & Du, L. (2026). Resolution Controls in 3-D Elastic-Wave Computed Tomography: Coupled Geometry–Target Effects and Resolution Scaling. Processes, 14(22), 3686. https://doi.org/10.3390/pr14223686

Vancouver

Li Z, Wang Y, Zheng C, Wu H, Xu Z, Ning X, et al. Resolution Controls in 3-D Elastic-Wave Computed Tomography: Coupled Geometry–Target Effects and Resolution Scaling. Processes. 2026;14(22):3686. doi:10.3390/pr14223686

BibTeX
@article{Li2026,
  author = {Li, Zhengcai and Wang, Yong and Zheng, Chao and Wu, Hao and Xu, Zhenbao and Ning, Xiaoyu and Du, Lizhi},
  title = {Resolution Controls in 3-D Elastic-Wave Computed Tomography: Coupled Geometry–Target Effects and Resolution Scaling},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {22},
  pages = {3686},
  doi = {10.3390/pr14223686}
}
Kostenlos starten →