EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Performance Validation of Foam Oil Metering Separator

Tao Liao, Yingting Sun, Haifan Zhang, Zhihui Liu, Xiangshun Zeng, Xiaoqin Xiong

Processes · 16.11.2026 · 14 (22) · 3685

DOI: 10.3390/pr14223685 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 16.11.2026. Verfasst von Tao Liao und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xinjiang Uygur Autonomous Region Natural Science Foundation funded project, Karamay innovation environment construction plan (innovative talents) project, National Major Science and Technology Project for New Oil and Gas Exploration and Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the engineering problems of low metering accuracy and frequent tank overflow in conventional metering separators caused by the high foam content characteristics of produced fluid from CO2 flooding, this paper designs a differential pressure continuous metering separator with a double-tank configuration. By developing a coupled numerical framework that incorporates the Eulerian multiphase flow model, the Realizable k–ε turbulence model, the Luo population balance model (PBM), and a bubble attenuation model calibrated with field-sampled foam half-life and bubble size range, the effects of foam half–life, pressure, and temperature on the internal flow field characteristics and metering performance of a single metering tank are analyzed as an engineering sensitivity study. The overall metering performance of the actual six-tank alternating metering separator is validated by laboratory and field tests. The single-tank simulation results indicate that under the working conditions of high gas–liquid ratio, different foam half–lives, different operating pressures and different temperatures, after the gas, foam and crude oil enter the separator tank, the distribution of foam and crude oil is clearly stratified. The liquid column pressures of foam and crude oil in the single tank can quickly reach a regional steady state, which can realize accurate liquid volume calculation well, and the overall metering error is maintained within 5%. Furthermore, validated by a series of laboratory calibration tests and multi-scenario field tests, the metering error of the developed device is consistently less than 10% under both indoor controlled conditions and actual complex on-site working conditions, which delivers a favorable and stable metering performance for the two–phase flow system. The proposed differential pressure double-tank alternating metering scheme in this study effectively reduces the interference of bubbles on liquid-phase metering accuracy, provides a reliable technical path for wellhead metering of produced fluid with high foam content, and also offers an effective solution for similar metering problems of foamy oil.

Förderung

  • Xinjiang Uygur Autonomous Region Natural Science Foundation funded project
  • Karamay innovation environment construction plan (innovative talents) project
  • National Major Science and Technology Project for New Oil and Gas Exploration and Development
  • Key Research and Development Special Project (Category A) of Xinjiang Uygur Autonomous Region
  • Xinjiang Tianshan innovation team

Zitieren

APA

Liao, T., Sun, Y., Zhang, H., Liu, Z., Zeng, X., & Xiong, X. (2026). Design and Performance Validation of Foam Oil Metering Separator. Processes, 14(22), 3685. https://doi.org/10.3390/pr14223685

Vancouver

Liao T, Sun Y, Zhang H, Liu Z, Zeng X, Xiong X. Design and Performance Validation of Foam Oil Metering Separator. Processes. 2026;14(22):3685. doi:10.3390/pr14223685

BibTeX
@article{Liao2026,
  author = {Liao, Tao and Sun, Yingting and Zhang, Haifan and Liu, Zhihui and Zeng, Xiangshun and Xiong, Xiaoqin},
  title = {Design and Performance Validation of Foam Oil Metering Separator},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {22},
  pages = {3685},
  doi = {10.3390/pr14223685}
}
Kostenlos starten →