EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self-Repairing Predictive Control for Selective Catalytic Reduction Systems Based on Slow Feature Analysis and Closed-Loop Subspace Identification

Jingwei Chen, Jiewen Zhu, Chen Zhang, Shuanzhu Sun, Binhai Yang, Junyang Lu, Yiguo Li

Processes · 11.11.2026 · 14 (22) · 3646

DOI: 10.3390/pr14223646 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 11.11.2026. Verfasst von Jingwei Chen und 6 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Model–plant mismatch can impair predictive control of selective catalytic reduction (SCR) systems as operating conditions and process dynamics change. This study develops a self-repairing model predictive control (MPC) framework integrating slow-feature analysis (SFA), short-duration input excitation, and optimized predictor-based subspace identification (PBSIDopt). Its contribution is the coordinated monitoring–excitation–identification–validation–updating procedure rather than a new SFA or identification algorithm. A candidate model is accepted only after an independent multistep-prediction test and model/controller checks; the predictor, controller, and residual monitor are then updated together. Four representative simulations examine abrupt mismatch, two rates of gradual mismatch, and a different parameter-change direction. Relative to fixed-model MPC, the SFA framework reduced whole-run mean absolute tracking error by 5.63–42.91% and final-interval error by 24.07–69.08%. Compared with an exponentially weighted moving average (EWMA) monitor embedded in the same repair framework, SFA yielded lower whole-run tracking errors in three of the four representative scenarios. These illustrative simulation results support the feasibility of the integrated framework; they do not establish universal monitoring superiority or long-term industrial safety.

Zitieren

APA

Chen, J., Zhu, J., Zhang, C., Sun, S., Yang, B., Lu, J., & Li, Y. (2026). Self-Repairing Predictive Control for Selective Catalytic Reduction Systems Based on Slow Feature Analysis and Closed-Loop Subspace Identification. Processes, 14(22), 3646. https://doi.org/10.3390/pr14223646

Vancouver

Chen J, Zhu J, Zhang C, Sun S, Yang B, Lu J, et al. Self-Repairing Predictive Control for Selective Catalytic Reduction Systems Based on Slow Feature Analysis and Closed-Loop Subspace Identification. Processes. 2026;14(22):3646. doi:10.3390/pr14223646

BibTeX
@article{Chen2026,
  author = {Chen, Jingwei and Zhu, Jiewen and Zhang, Chen and Sun, Shuanzhu and Yang, Binhai and Lu, Junyang and Li, Yiguo},
  title = {Self-Repairing Predictive Control for Selective Catalytic Reduction Systems Based on Slow Feature Analysis and Closed-Loop Subspace Identification},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {22},
  pages = {3646},
  doi = {10.3390/pr14223646}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche