EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrothermal Synthesis of Hydroxyapatite-Rich Calcium Phosphate from Converter Steel Slag via Sequential Water–Acetic Acid Leaching

Peng Yu, Kai Zhang, Junguo Li, Jinqi Dou, Qi Liu, Yajun Wang

Processes · 09.11.2026 · 14 (21) · 3612

DOI: 10.3390/pr14213612 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 09.11.2026. Verfasst von Peng Yu und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yanzhao Iron and Steel Laboratory Regional Innovation Ability Promotion Project, Innovative Research Group Project of Natural Science Foundation of Hebei Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Converter steel slag contains abundant calcium-bearing phases but remains underutilised because of its heterogeneous composition and the potential co-release of undesirable elements. In this study, a hydroxyapatite-rich calcium-phosphate powder was prepared from converter steel slag through sequential water–acetic acid leaching followed by phosphate precipitation and hydrothermal treatment. The slag was first leached with deionised water at a liquid-to-solid ratio of 50 mL·g−1 for 30 min at 25 °C. The residue was subsequently leached with 1 mol·L−1 acetic acid at 65 °C for 1 h. The combined leachates were reacted with phosphoric acid, adjusted to pH 11 using sodium hydroxide, and hydrothermally treated at 120 °C for 48 h. X-ray diffraction indicated that hydroxyapatite was the dominant identifiable crystalline phase, accompanied by a minor β-tricalcium phosphate phase. Fourier-transform infrared spectroscopy confirmed phosphate- and hydroxyl-related functional groups. Scanning electron microscopy revealed predominantly needle-like particles with lengths of approximately 1–12 μm. Inductively coupled plasma optical emission spectrometry gave calcium and phosphorus concentrations of 183.96 and 82.33 mg·L−1, respectively, corresponding to an apparent Ca/P molar ratio of approximately 1.73. In a 24 h extract assay using human bone marrow-derived mesenchymal stem cells, the relative cell viability was 103.74% ± 1.82% at 1% extract and decreased to 65.22% ± 4.81% at 5% extract and 5.31% ± 0.73% at 100% extract. The 1% extract group did not differ significantly from the control. The 5–100% extract groups showed significantly lower viability than the control group, with p < 0.01. These results demonstrate the feasibility of converting calcium-bearing components of converter steel slag into a hydroxyapatite-rich calcium-phosphate powder at laboratory scale. Further work is required to establish calcium mass balance, quantitative phase composition, trace-element distribution, process reproducibility, and long-term biological performance.

Förderung

  • Yanzhao Iron and Steel Laboratory Regional Innovation Ability Promotion Project
  • Innovative Research Group Project of Natural Science Foundation of Hebei Province
  • National Natural Science Foundation of China
  • Central Guiding Local Science and Technology Development Fund Project

Zitieren

APA

Yu, P., Zhang, K., Li, J., Dou, J., Liu, Q., & Wang, Y. (2026). Hydrothermal Synthesis of Hydroxyapatite-Rich Calcium Phosphate from Converter Steel Slag via Sequential Water–Acetic Acid Leaching. Processes, 14(21), 3612. https://doi.org/10.3390/pr14213612

Vancouver

Yu P, Zhang K, Li J, Dou J, Liu Q, Wang Y. Hydrothermal Synthesis of Hydroxyapatite-Rich Calcium Phosphate from Converter Steel Slag via Sequential Water–Acetic Acid Leaching. Processes. 2026;14(21):3612. doi:10.3390/pr14213612

BibTeX
@article{Yu2026,
  author = {Yu, Peng and Zhang, Kai and Li, Junguo and Dou, Jinqi and Liu, Qi and Wang, Yajun},
  title = {Hydrothermal Synthesis of Hydroxyapatite-Rich Calcium Phosphate from Converter Steel Slag via Sequential Water–Acetic Acid Leaching},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {3612},
  doi = {10.3390/pr14213612}
}
Kostenlos starten →