EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fracture Propagation and Reservoir Energization During CO2 Pre-Fracturing in Tight Sandstone Gas Reservoirs: Numerical Simulation and Optimization of Injection Volume and Rate

Hongke Wang, Bingxiang Dong, Hua Wu, Lixia Jin, Guoliang Li, Zhiwei Wu, Jianxia Jin, Cen Gao, Qing Chang

Processes · 06.11.2026 · 14 (21) · 3598

DOI: 10.3390/pr14213598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 06.11.2026. Verfasst von Hongke Wang und 8 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPC Bohai Drilling Engineering Company Limited.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CO2 pre-fracturing is a potential stimulation method for the Sulige tight sandstone gas reservoir, where low permeability and limited reservoir pressure constrain gas production. CO2 has attracted interest in tight-reservoir stimulation because of its low viscosity and high diffusivity, which may influence fluid flow and pressure propagation in the formation. However, the effects of CO2 injection volume and rate on fracture propagation and reservoir energization remain insufficiently quantified, making treatment parameter optimization difficult. In this study, a thermo-hydro-mechanical-damage (THMD) model based on continuum damage mechanics was developed to describe the coupled processes of fluid flow, stress evolution, heat transfer, and rock damage during CO2 pre-fracturing in the Sulige tight sandstone gas reservoir. The model was validated against FracproPT predictions of fracture half-length and field measurements of breakdown pressure, with relative errors of 5.88% and 6.56%, respectively. Numerical simulations were conducted at CO2 injection volumes of 25, 50, and 75 m3 and injection rates of 2, 3, and 4 m3/min to evaluate fracture geometry, damage, and pressure distribution. Four indicators—fracture half-length, damage area, fracture symmetry coefficient, and energized area increment—were integrated using the entropy weight method. Results indicate that larger injection volumes generally increased fracture half-length and damage area but also exacerbated fracture asymmetry. The energized area increment showed a non-monotonic trend, while an injection rate of 3 m3/min generally provided a favorable balance between fracture extension and symmetry. Scheme 8 (75 m3, 3 m3/min) achieved the highest comprehensive score of 0.8855, whereas scheme 5 (50 m3, 3 m3/min) was recommended for engineering applications because it provided substantial reservoir energization with lower CO2 consumption and comparable fracture extension. The results provide a quantitative basis for optimizing CO2 injection volume and rate in tight sandstone gas reservoirs.

Förderung

  • CNPC Bohai Drilling Engineering Company Limited

Zitieren

APA

Wang, H., Dong, B., Wu, H., Jin, L., Li, G., Wu, Z., Jin, J., Gao, C., & Chang, Q. (2026). Fracture Propagation and Reservoir Energization During CO2 Pre-Fracturing in Tight Sandstone Gas Reservoirs: Numerical Simulation and Optimization of Injection Volume and Rate. Processes, 14(21), 3598. https://doi.org/10.3390/pr14213598

Vancouver

Wang H, Dong B, Wu H, Jin L, Li G, Wu Z, et al. Fracture Propagation and Reservoir Energization During CO2 Pre-Fracturing in Tight Sandstone Gas Reservoirs: Numerical Simulation and Optimization of Injection Volume and Rate. Processes. 2026;14(21):3598. doi:10.3390/pr14213598

BibTeX
@article{Wang2026,
  author = {Wang, Hongke and Dong, Bingxiang and Wu, Hua and Jin, Lixia and Li, Guoliang and Wu, Zhiwei and Jin, Jianxia and Gao, Cen and Chang, Qing},
  title = {Fracture Propagation and Reservoir Energization During CO2 Pre-Fracturing in Tight Sandstone Gas Reservoirs: Numerical Simulation and Optimization of Injection Volume and Rate},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {3598},
  doi = {10.3390/pr14213598}
}
Kostenlos starten →