EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Influence of Inlet Inclination Angle on the Erosion Characteristics of a Drilling Float Valve

Xin Zhang, Junan Lu, Yanwen Liu, Xitian Shi, Xuliang Zhang, Lin Zhong

Processes · 06.11.2026 · 14 (21) · 3589

DOI: 10.3390/pr14213589 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 06.11.2026. Verfasst von Xin Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tarim Oilfield Company, Sichuan Association for Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Localized erosion near the valve cover and pin shaft can impair the reliability of drilling float valve. This study investigates an eccentric contraction modification for a 62 mm float valve, in which the small-end cross-section is shifted away from the pin shaft while the diameters of both end sections remain unchanged. Computational fluid dynamics simulations incorporating the RNG k–ε turbulence model, discrete phase model, and Oka erosion model were conducted to investigate the erosion characteristics for inlet inclination angles of 4.5–8.5°. At a flow rate of 20 L/s, a solid volume fraction of 0.5%, and a drilling-fluid viscosity of 20 mPa·s, increasing the inclination angle from 4.5° to 8.5° reduced the average erosion rates of the valve cover and valve spool body by 94% and 51%, respectively. The modification redirected particle-laden flow away from these critical components and reduced concentrated particle impacts. The effects of particle size, fluid viscosity, and solid concentration were also examined. Comparative tests conducted for 15 h at 20 L/s and a sand volume fraction of 15% showed visibly less valve-cover damage for the structural optimization of float valve, providing qualitative support for the predicted improvement. An inclination angle of 8.5° is recommended within the investigated geometric and seal-installation constraints.

Förderung

  • Tarim Oilfield Company
  • Sichuan Association for Science and Technology

Zitieren

APA

Zhang, X., Lu, J., Liu, Y., Shi, X., Zhang, X., & Zhong, L. (2026). Study on the Influence of Inlet Inclination Angle on the Erosion Characteristics of a Drilling Float Valve. Processes, 14(21), 3589. https://doi.org/10.3390/pr14213589

Vancouver

Zhang X, Lu J, Liu Y, Shi X, Zhang X, Zhong L. Study on the Influence of Inlet Inclination Angle on the Erosion Characteristics of a Drilling Float Valve. Processes. 2026;14(21):3589. doi:10.3390/pr14213589

BibTeX
@article{Zhang2026,
  author = {Zhang, Xin and Lu, Junan and Liu, Yanwen and Shi, Xitian and Zhang, Xuliang and Zhong, Lin},
  title = {Study on the Influence of Inlet Inclination Angle on the Erosion Characteristics of a Drilling Float Valve},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {3589},
  doi = {10.3390/pr14213589}
}
Kostenlos starten →