Investigation of the Cold Working Effect on the Corrosion Resistance of 1.4301 Stainless Steel
Processes · 05.11.2026 · 14 (21) · 3568
DOI: 10.3390/pr14213568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 05.11.2026. Verfasst von Péter Pató und 3 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research investigated the effect of cold working on the corrosion resistance of 1.4301 (X5CrNi18-10, AISI 304) austenitic stainless steel. The test specimens were prepared by cold rolling. The original thickness of the austenitic steel was 3.0 mm. Cold rolling produced specimens with thicknesses of 2.5, 2.0, 1.5, 1.0, and 0.65 mm. A corrosion test was conducted according to ASTM G48 in a 6% ferric chloride solution for 45 h. The corrosion process caused weight loss, which was measured for all test specimens. The corrosion test results showed a clear correlation between deformation and corrosion-induced weight loss. Corrosion weight loss depended on the degree of cold working. Based on these results, the PREN index—which can be determined from the chemical composition—is not sufficient on its own to characterise the corrosion resistance of 1.4301 austenitic stainless steel, as the degree of cold working significantly modifies the extent of corrosion resistance.
Zitieren
APA
Pató, P., Haraszti, F., Nyikes, Z., & Kovács, T. A. (2026). Investigation of the Cold Working Effect on the Corrosion Resistance of 1.4301 Stainless Steel. Processes, 14(21), 3568. https://doi.org/10.3390/pr14213568
Vancouver
Pató P, Haraszti F, Nyikes Z, Kovács TA. Investigation of the Cold Working Effect on the Corrosion Resistance of 1.4301 Stainless Steel. Processes. 2026;14(21):3568. doi:10.3390/pr14213568
BibTeX
@article{Pat2026,
author = {Pató, Péter and Haraszti, Ferenc and Nyikes, Zoltán and Kovács, Tünde Anna},
title = {Investigation of the Cold Working Effect on the Corrosion Resistance of 1.4301 Stainless Steel},
journal = {Processes},
year = {2026},
volume = {14},
number = {21},
pages = {3568},
doi = {10.3390/pr14213568}
}
EUVIMED