EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Competitive Propagation of Multi-Cluster Fractures and Parameter Combination Optimization for Ball-Sealer Temporary-Plugging Fracturing in Deep Coal Seams

Kuanwei Zhao, Xiangwei Kong, Hengda Che, Guang Xin, Shuai Wen

Processes · 30.10.2026 · 14 (21) · 3473

DOI: 10.3390/pr14213473 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 30.10.2026. Verfasst von Kuanwei Zhao und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNOOC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Competitive fracture propagation and the selection of temporary-plugging parameters are important challenges in multi-cluster fracturing of deep-coal horizontal wells. A three-dimensional discrete-lattice fluid–solid coupling model was employed to represent rock failure, fracture flow, dynamic wellbore–perforation–fracture flow allocation, and ball-sealer-induced diversion. Model performance was assessed through comparisons with an analytical solution for a penny-shaped hydraulic fracture and a field bottomhole-pressure record. The effects of plugging timing, ball-sealer placement ratio, and cluster spacing were evaluated through parameter comparisons and targeted plugging-time checks. The results show that plugging at 50% of the total injection time provides a favorable balance between fracture area and propagation uniformity. A reasonable range exists for the ball-sealer placement ratio, whereas excessive plugging can cause over-diversion and intensify fracture differentiation. Cluster spacing has a distinctly non-monotonic effect. Among 20 placement-ratio–spacing combinations evaluated at a fixed 50% plugging time, a 50% ball-sealer placement ratio and 25 m cluster spacing yielded a total fracture area of 793.26 m2 and a fracture-area differentiation coefficient of 0.0896. Additional timing checks favored the 50% plugging time among the three tested levels. In an observational comparison of two wells from the same block, the optimized well exhibited a 54.7% higher average daily gas production over the first 90 days; this difference cannot be attributed solely to the selected fracturing parameters. These findings provide conditional design guidance for multi-cluster temporary-plugging fracturing under the representative deep-coal stress conditions and simplified coal-rock assumptions investigated.

Förderung

  • CNOOC

Zitieren

APA

Zhao, K., Kong, X., Che, H., Xin, G., & Wen, S. (2026). Competitive Propagation of Multi-Cluster Fractures and Parameter Combination Optimization for Ball-Sealer Temporary-Plugging Fracturing in Deep Coal Seams. Processes, 14(21), 3473. https://doi.org/10.3390/pr14213473

Vancouver

Zhao K, Kong X, Che H, Xin G, Wen S. Competitive Propagation of Multi-Cluster Fractures and Parameter Combination Optimization for Ball-Sealer Temporary-Plugging Fracturing in Deep Coal Seams. Processes. 2026;14(21):3473. doi:10.3390/pr14213473

BibTeX
@article{Zhao2026,
  author = {Zhao, Kuanwei and Kong, Xiangwei and Che, Hengda and Xin, Guang and Wen, Shuai},
  title = {Competitive Propagation of Multi-Cluster Fractures and Parameter Combination Optimization for Ball-Sealer Temporary-Plugging Fracturing in Deep Coal Seams},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {3473},
  doi = {10.3390/pr14213473}
}
Kostenlos starten →