EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Characteristics and Structural Innovation of a Deepwater Subsea Wellhead System

Xuezhan Zhao, Guangjin Chen, Yi Hong, Jingtian Qin, Shujie Liu, Lei Li, Shuzhan Li, Gengchen Li, Jiale Yang, Lingfang Tan, Xiaolong Yang, Kun Jiang

Processes · 07.08.2026 · 14 (16) · 2535

DOI: 10.3390/pr14162535 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 07.08.2026. Verfasst von Xuezhan Zhao und 11 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the bending resistance and support the domestic development of deepwater subsea wellhead equipment, a three-dimensional finite element model (FEM) of the SXW-15 subsea wellhead system was established in ANSYS Workbench considering contact nonlinearity and rigid-locking mechanisms. Based on representative deepwater drilling and completion conditions, the effects of the friction coefficient, locking preload, blowout preventer (BOP)/lower marine riser package (LMRP) top load, casing hanger internal pressure, and tubing load on the ultimate bending capacity of the system were systematically investigated. The results show that the bending capacity increases with increasing friction coefficient and locking preload, whereas it decreases with increasing top load and tubing weight. The internal pressure of the casing hanger exhibits a pronounced nonlinear influence on the bending resistance, and the maximum bending capacity occurs at an internal pressure of approximately 4000 psi. Based on the mechanical analysis, several innovative designs were proposed, including a layered load-bearing structure, a gravity-set metal sealing assembly, a self-supporting rigid-locking mechanism, and an integrated multifunctional tool system, aiming to improve load-transfer efficiency, connection stiffness, and high-pressure sealing stability. Land-based testing and offshore field applications were subsequently conducted to verify the engineering applicability of the system. The subsea wellhead system with innovative designs maintained satisfactory structural integrity and sealing reliability under conditions of 15,000 psi internal pressure and 12.7 million lb axial load. Good agreement was obtained between finite element predictions and field test results. The present study provides theoretical support and guidance for the structural designs and engineering applications of deepwater subsea wellhead systems.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhao, X., Chen, G., Hong, Y., Qin, J., Liu, S., Li, L., Li, S., Li, G., Yang, J., Tan, L., Yang, X., & Jiang, K. (2026). Mechanical Characteristics and Structural Innovation of a Deepwater Subsea Wellhead System. Processes, 14(16), 2535. https://doi.org/10.3390/pr14162535

Vancouver

Zhao X, Chen G, Hong Y, Qin J, Liu S, Li L, et al. Mechanical Characteristics and Structural Innovation of a Deepwater Subsea Wellhead System. Processes. 2026;14(16):2535. doi:10.3390/pr14162535

BibTeX
@article{Zhao2026,
  author = {Zhao, Xuezhan and Chen, Guangjin and Hong, Yi and Qin, Jingtian and Liu, Shujie and Li, Lei and Li, Shuzhan and Li, Gengchen and Yang, Jiale and Tan, Lingfang and Yang, Xiaolong and Jiang, Kun},
  title = {Mechanical Characteristics and Structural Innovation of a Deepwater Subsea Wellhead System},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {16},
  pages = {2535},
  doi = {10.3390/pr14162535}
}
Kostenlos starten →