Development and Experimental Validation of Magnetic Saturation Pulsed Eddy Current Testing for Thick Ferromagnetic Structures
Processes · 07.08.2026 · 14 (16) · 2531
DOI: 10.3390/pr14162531 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 07.08.2026. Verfasst von Haiming Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Technology Special Project.
Abstract (Originalsprache)
The detection of outer-wall defects in thick ferromagnetic structures by conventional pulsed eddy current testing is limited by the shallow penetration depth caused by the high magnetic permeability of ferromagnetic materials. In this study, a magnetic saturation pulsed eddy current testing method is proposed to improve the detectability of such defects. The analytical dependence of the eddy current skin depth on magnetic permeability was first clarified, and finite element simulations were carried out to visualize the effect of magnetic saturation on the magnetic field and eddy current distributions. Pulsed eddy current responses under different relative permeabilities were then numerically analyzed, followed by experimental validation using Q345B steel plates with different thicknesses and cubic Q345B specimens containing flat-bottom hole defects of different depths. The influence of the direction of the saturation magnetic field on testing performance was also investigated. The results demonstrate that magnetic saturation effectively increases eddy current penetration depth and significantly improves the sensitivity of pulsed eddy current testing to wall-thinning defects in thick ferromagnetic structures. Signal separation for different defect depths was markedly enhanced under saturated conditions. In addition, the optimal testing performance was achieved when the saturation magnetic field was parallel to the probe axis. These results, obtained on uncoated specimens under laboratory conditions, provide a validated physical basis and a preferred field-probe configuration for applying magnetic saturation pulsed eddy current testing to thick-walled ferromagnetic components.
Förderung
- National Key Technology Special Project
Zitieren
APA
Zhang, H., Chen, L., Ma, X., Liang, T., Zhang, G., Liu, C., & Xie, S. (2026). Development and Experimental Validation of Magnetic Saturation Pulsed Eddy Current Testing for Thick Ferromagnetic Structures. Processes, 14(16), 2531. https://doi.org/10.3390/pr14162531
Vancouver
Zhang H, Chen L, Ma X, Liang T, Zhang G, Liu C, et al. Development and Experimental Validation of Magnetic Saturation Pulsed Eddy Current Testing for Thick Ferromagnetic Structures. Processes. 2026;14(16):2531. doi:10.3390/pr14162531
BibTeX
@article{Zhang2026,
author = {Zhang, Haiming and Chen, Ligang and Ma, Xiaoxiao and Liang, Tao and Zhang, Ge and Liu, Chenyang and Xie, Shuyi},
title = {Development and Experimental Validation of Magnetic Saturation Pulsed Eddy Current Testing for Thick Ferromagnetic Structures},
journal = {Processes},
year = {2026},
volume = {14},
number = {16},
pages = {2531},
doi = {10.3390/pr14162531}
}
EUVIMED