Impact of Drug Loading and Mannitol on Mechanical Properties and Printability of Filaments: A Comparative Study of Single-Screw Extruder vs. Twin-Screw Extruder
Processes · 27.07.2026 · 14 (15) · 2411
DOI: 10.3390/pr14152411 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 27.07.2026. Verfasst von Sonia Iurian und 9 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian Ministry of Research, Innovation and Digitization.
Abstract (Originalsprache)
The manufacturing of drug-loaded filaments aimed for fused deposition modeling (FDM) three-dimensional printing (3DP) is still an important challenge because the filament mechanical profile and printing performance depend on both formulation and process-related factors. This study investigated the impact of extrusion technology on the mechanical properties and printability of paracetamol-loaded polyvinyl alcohol filaments with variable compositions. Filaments with compositions according to a full-factorial design were processed by single-screw extrusion (SSE) and twin-screw extrusion (TSE). Mechanical properties were assessed using the 3-point bending test and stiffness test. The thermal behavior of the components was evaluated through differential scanning calorimetry (DSC), while printability was evaluated through feeding and printing tests. Both formulation factors affected mechanical performance. High paracetamol content generally reduces stiffness and flexural resistance while increasing deformation capacity, suggesting a secondary plasticizing effect in the studied concentration range. Mannitol exhibited limited plasticizing efficiency, with flexibility decreasing at high ratios. DSC indicated partial crystallinity after extrusion, with TSE showing lower residual melting enthalpies than SSE. TSE filaments provided higher model reproducibility, broader mechanical ranges, and higher printability scores. This study shows that formulation effects depended strongly on extrusion technology and highlights TSE as a more robust platform for producing printable pharmaceutical filaments.
Förderung
- Romanian Ministry of Research, Innovation and Digitization
Zitieren
APA
Iurian, S., Achim, A. M., Rus, L., Șerbu, A., Couti, N., Crisan, A. G., Iovanov, R. I., Casian, T., Porfire, A., & Tomuta, I. (2026). Impact of Drug Loading and Mannitol on Mechanical Properties and Printability of Filaments: A Comparative Study of Single-Screw Extruder vs. Twin-Screw Extruder. Processes, 14(15), 2411. https://doi.org/10.3390/pr14152411
Vancouver
Iurian S, Achim AM, Rus L, Șerbu A, Couti N, Crisan AG, et al. Impact of Drug Loading and Mannitol on Mechanical Properties and Printability of Filaments: A Comparative Study of Single-Screw Extruder vs. Twin-Screw Extruder. Processes. 2026;14(15):2411. doi:10.3390/pr14152411
BibTeX
@article{Iurian2026,
author = {Iurian, Sonia and Achim, Ana Marcela and Rus, Lucia and Șerbu, Andrada-Maria and Couti, Nadine and Crisan, Andrea Gabriela and Iovanov, Rareș Iuliu and Casian, Tibor and Porfire, Alina and Tomuta, Ioan},
title = {Impact of Drug Loading and Mannitol on Mechanical Properties and Printability of Filaments: A Comparative Study of Single-Screw Extruder vs. Twin-Screw Extruder},
journal = {Processes},
year = {2026},
volume = {14},
number = {15},
pages = {2411},
doi = {10.3390/pr14152411}
}
EUVIMED