Rheological Properties and Prediction Method for Oil-Based Drilling Fluids Under High-Temperature and High-Pressure Conditions
Processes · 24.07.2026 · 14 (15) · 2387
DOI: 10.3390/pr14152387 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 24.07.2026. Verfasst von Mingsheng Liu und 9 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The rheology of high-temperature and high-pressure oil-based drilling fluids is critical for managed pressure drilling in deep and ultra-deep wells. This study investigates the rheological behavior of high-temperature and high-pressure oil-based drilling fluid from the Tarim Basin under conditions of 60–160 °C and 60–140 MPa. Three oil-based drilling fluids with densities of 1.8, 2.0, and 2.2 g/cm3 were tested under 60 temperature–pressure–density conditions, and six rotational speeds were selected for each condition, resulting in 360 rheological data points for model evaluation and parameter prediction. Rheological models, including Bingham, Power law, Casson, and Herschel–Bulkley, were established and evaluated to identify the optimal model. An improved high-temperature and high-pressure rheological parameter prediction model was proposed. Unlike previous correlations mainly developed for Bingham rheological parameters, the proposed model directly predicts the three Herschel–Bulkley parameters and introduces a quadratic pressure term to describe the nonlinear pressure dependence under high-temperature and high-pressure conditions. The results indicate that the Herschel–Bulkley model best characterizes the fluid’s rheological properties, with an average relative error of 2.64% in shear stress prediction and superior regression accuracy compared to Landmark WellPlan software, achieving an average error of 2.049%. Density significantly affects yield stress and consistency coefficient, while temperature and pressure have minimal impact on the flow index. Rheological parameters exhibit opposite trends under varying densities. The improved Herschel–Bulkley model enables precise rheological parameter predictions within the tested range, with average prediction accuracies of 81.40% for yield stress, 97.90% for flow index, and 87.05% for consistency coefficient, meeting engineering requirements. These findings provide theoretical support for managed pressure drilling in deep and ultra-deep wells.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, M., Xu, Y., Xia, Q., Wang, H., Guo, Q., Zhang, H., Ye, C., Zhang, G., Wang, B., & Zheng, Y. (2026). Rheological Properties and Prediction Method for Oil-Based Drilling Fluids Under High-Temperature and High-Pressure Conditions. Processes, 14(15), 2387. https://doi.org/10.3390/pr14152387
Vancouver
Liu M, Xu Y, Xia Q, Wang H, Guo Q, Zhang H, et al. Rheological Properties and Prediction Method for Oil-Based Drilling Fluids Under High-Temperature and High-Pressure Conditions. Processes. 2026;14(15):2387. doi:10.3390/pr14152387
BibTeX
@article{Liu2026,
author = {Liu, Mingsheng and Xu, Yaopu and Xia, Qi and Wang, Haizhu and Guo, Qingfeng and Zhang, Haizhi and Ye, Chenxi and Zhang, Guoxin and Wang, Bin and Zheng, Yong},
title = {Rheological Properties and Prediction Method for Oil-Based Drilling Fluids Under High-Temperature and High-Pressure Conditions},
journal = {Processes},
year = {2026},
volume = {14},
number = {15},
pages = {2387},
doi = {10.3390/pr14152387}
}
EUVIMED