EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evolution of Mechanical Properties and Damage of Deep Coal Under CO2 Foam Treatment

Changjiang Duan, Xin Jin, Dong Han, Xuefeng Shi, Longgang Zhou, Lijun Gao, Chengzhen Liu, Wenjun Xu, Chen Hao

Processes · 07.07.2026 · 14 (13) · 2224

DOI: 10.3390/pr14132224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 07.07.2026. Verfasst von Changjiang Duan und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNOOC EnerTech Drilling & Production Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CO2 foam fracturing has emerged as a promising stimulation technology for enhancing permeability and improving production performance in deep coalbed methane (CBM) reservoirs while providing additional potential for carbon utilization. However, the multiscale relationship between local mechanical degradation and macroscopic mechanical deterioration and fracture instability induced by CO2 foam treatment remains insufficiently understood. In this study, four candidate coal samples originating from the Carboniferous–Permian No. 8+9 coal seam system were first comparatively characterized. Based on petrographic characteristics, mineralogical composition, and specimen integrity, representative bright coal and semi-dull coal samples from the Lüliang mining area were selected for subsequent multiscale mechanical investigations. Based on petrographic characteristics, mineralogical composition, and specimen integrity, representative bright coal and semi-dull coal samples from the Lüliang mining area were selected for petrographic analysis, X-ray diffraction (XRD), nanoindentation, conventional triaxial compression, and cracked chevron-notched Brazilian disc (CCNBD) fracture toughness tests. Coal specimens were immersed in CO2 foam under reservoir-relevant conditions (50 °C, 20 MPa, foam quality of 65%) for different durations (0–6 days), and the coupled evolution of micromechanical properties, macroscopic mechanical behavior, and fracture resistance was evaluated. The results indicate that both coal types exhibit pronounced heterogeneity in maceral composition and mineral distribution. Bright coal is characterized by high vitrinite content and low mineral abundance, whereas semi-dull coal contains higher proportions of inertinite and minerals. Nanoindentation results reveal that mineral-rich regions possess significantly higher Young’s modulus and hardness than organic-matter-rich regions, highlighting pronounced micromechanical heterogeneity within the coal matrix. With increasing immersion time, the micromechanical properties of both coals exhibit a two-stage evolution characterized by rapid initial deterioration followed by a gradual stabilization trend. After 6 days of immersion, the average Young’s modulus and hardness of bright coal decreased by 40% and 30%, respectively, whereas those of semi-dull coal decreased by 30% and 17%. Simultaneously, macroscopic mechanical properties and fracture resistance continuously declined, with fracture toughness reductions of 74% and 55% for bright coal and semi-dull coal, respectively. Compared with semi-dull coal, bright coal exhibited higher damage sensitivity, evolving from dominant single-fracture failure to granular fragmentation, whereas semi-dull coal maintained a multi-crack composite shear failure mode. Combined micromechanical and macroscopic observations suggest that the observed mechanical deterioration may be associated with coupled effects of fluid–coal interaction, matrix softening, and progressive damage evolution. Although pore and crack evolution were not directly observed, the results suggest that coal structure plays an important role in governing damage transfer across scales and thereby influences fracture behavior and mechanical weakening. These findings provide insight into the multiscale mechanical response of coal under CO2 foam treatment and may support the optimization of stimulation strategies for deep CBM reservoirs.

Förderung

  • CNOOC EnerTech Drilling & Production Co., Ltd.

Zitieren

APA

Duan, C., Jin, X., Han, D., Shi, X., Zhou, L., Gao, L., Liu, C., Xu, W., & Hao, C. (2026). Evolution of Mechanical Properties and Damage of Deep Coal Under CO2 Foam Treatment. Processes, 14(13), 2224. https://doi.org/10.3390/pr14132224

Vancouver

Duan C, Jin X, Han D, Shi X, Zhou L, Gao L, et al. Evolution of Mechanical Properties and Damage of Deep Coal Under CO2 Foam Treatment. Processes. 2026;14(13):2224. doi:10.3390/pr14132224

BibTeX
@article{Duan2026,
  author = {Duan, Changjiang and Jin, Xin and Han, Dong and Shi, Xuefeng and Zhou, Longgang and Gao, Lijun and Liu, Chengzhen and Xu, Wenjun and Hao, Chen},
  title = {Evolution of Mechanical Properties and Damage of Deep Coal Under CO2 Foam Treatment},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2224},
  doi = {10.3390/pr14132224}
}
Kostenlos starten →